[PATCH] mach-ux500: Fix around AB8500 GPIO macro name
From: Philippe Langlais <hidden>
Date: 2012-02-13 09:52:25
Subsystem:
arm port, arm/nomadik/ux500 architectures, the rest · Maintainers:
Russell King, Linus Walleij, Linus Torvalds
From: Philippe Langlais <redacted> AB8500 GPIO1 is the base of AB8500 gpio number too. Signed-off-by: Philippe Langlais <redacted> --- arch/arm/mach-ux500/board-mop500.c | 2 +- arch/arm/mach-ux500/board-mop500.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 8748087..542914b 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c@@ -72,7 +72,7 @@ static struct platform_device snowball_led_dev = { }; static struct ab8500_gpio_platform_data ab8500_gpio_pdata = { - .gpio_base = MOP500_AB8500_GPIO(0), + .gpio_base = MOP500_AB8500_PIN_GPIO(1), .irq_base = MOP500_AB8500_VIR_GPIO_IRQ_BASE, /* config_reg is the initial configuration of ab8500 pins. * The pins can be configured as GPIO or alt functions based
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index f926d3d..7ff6cbf 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h@@ -63,7 +63,7 @@ * because the AB8500 GPIO pins are enumbered starting from 1, so the value in * parens matches the GPIO pin number in the data sheet. */ -#define MOP500_AB8500_GPIO(x) (MOP500_EGPIO_END + (x) - 1) +#define MOP500_AB8500_PIN_GPIO(x) (MOP500_EGPIO_END + (x) - 1) /*Snowball AB8500 GPIO */ #define SNOWBALL_VSMPS2_1V8_GPIO MOP500_AB8500_PIN_GPIO(1) /* SYSCLKREQ2/GPIO1 */ #define SNOWBALL_PM_GPIO1_GPIO MOP500_AB8500_PIN_GPIO(2) /* SYSCLKREQ3/GPIO2 */
--
1.7.6