[PATCH] ARM: realview: fix unconnected interrupts on EB11MP
From: Marc Zyngier <hidden>
Date: 2012-01-27 16:04:14
Subsystem:
arm port, the rest · Maintainers:
Russell King, Linus Torvalds
Since commit 2eac58d (ARM: amba: make use of -1 IRQs warn), we're able to detect the use of value -1 to indicate the lack of interrupt line. The RealView EB, when used with the 11MPCore tile, has a number of devices without interrupts, and uses the value -1 to indicate this. Change that value to 0 to conform to the new behaviour. Signed-off-by: Marc Zyngier <redacted> --- arch/arm/mach-realview/include/mach/irqs-eb.h | 23 +++++++++++++---------- 1 files changed, 13 insertions(+), 10 deletions(-)
diff --git a/arch/arm/mach-realview/include/mach/irqs-eb.h b/arch/arm/mach-realview/include/mach/irqs-eb.h
index 204d537..d6b5073 100644
--- a/arch/arm/mach-realview/include/mach/irqs-eb.h
+++ b/arch/arm/mach-realview/include/mach/irqs-eb.h@@ -96,16 +96,19 @@ #define IRQ_EB11MP_L220_SLAVE (IRQ_EB_GIC_START + 30) #define IRQ_EB11MP_L220_DECODE (IRQ_EB_GIC_START + 31) -#define IRQ_EB11MP_UART2 -1 -#define IRQ_EB11MP_UART3 -1 -#define IRQ_EB11MP_CLCD -1 -#define IRQ_EB11MP_DMA -1 -#define IRQ_EB11MP_WDOG -1 -#define IRQ_EB11MP_GPIO0 -1 -#define IRQ_EB11MP_GPIO1 -1 -#define IRQ_EB11MP_GPIO2 -1 -#define IRQ_EB11MP_SCI -1 -#define IRQ_EB11MP_SSP -1 +/* + * The 11MPcore tile leaves the following unconnected. + */ +#define IRQ_EB11MP_UART2 0 +#define IRQ_EB11MP_UART3 0 +#define IRQ_EB11MP_CLCD 0 +#define IRQ_EB11MP_DMA 0 +#define IRQ_EB11MP_WDOG 0 +#define IRQ_EB11MP_GPIO0 0 +#define IRQ_EB11MP_GPIO1 0 +#define IRQ_EB11MP_GPIO2 0 +#define IRQ_EB11MP_SCI 0 +#define IRQ_EB11MP_SSP 0 #define NR_GIC_EB11MP 2
--
1.7.7.1