[PATCH] dt/tegra: seaboard: add i2c devices
From: Olof Johansson <hidden>
Date: 2011-12-23 02:33:13
Also in:
linux-tegra
Subsystem:
the rest · Maintainer:
Linus Torvalds
Add the known i2c devices on seaboard to the i2c table. Also rename the temperature sensor device node, and mark it as a nct1008 instead of an adt7461 (which it is -- the chips are compatible though). Signed-off-by: Olof Johansson <redacted> --- arch/arm/boot/dts/tegra-seaboard.dts | 29 +++++++++++++++++++++++++++-- 1 files changed, 27 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts
index b55a02e..b64e0bd 100644
--- a/arch/arm/boot/dts/tegra-seaboard.dts
+++ b/arch/arm/boot/dts/tegra-seaboard.dts@@ -13,6 +13,18 @@ i2c at 7000c000 { clock-frequency = <400000>; + + light-sensor at 44 { + compatible = "isil,isl29018"; + reg = <0x44>; + interrupts = < 0 202 0x04 >; /* gpio PZ2 */ + }; + + gyrometer at 68 { + compatible = "invn,mpu3050"; + reg = <0x68>; + interrupts = < 0 204 0x04 >; /* gpio PZ4 */ + }; }; i2c at 7000c400 {
@@ -21,15 +33,28 @@ i2c at 7000c500 { clock-frequency = <400000>; + + smart-battery at b { + compatible = "ti,bq20z75", "smart-battery-1.1"; + ti,i2c-retry-count = < 2 >; + ti,poll-retry-count = < 10 >; + reg = <0xb>; + }; }; i2c at 7000d000 { clock-frequency = <400000>; - adt7461 at 4c { - compatible = "adt7461"; + temperature-sensor at 4c { + compatible = "nct1008"; reg = <0x4c>; }; + + magnetometer at c { + compatible = "ak8975"; + reg = <0xc>; + interrupts = < 0 109 0x04 >; /* gpio PN5 */ + }; }; serial at 70006000 {
--
1.7.8.GIT