Heiko St?bner wrote:

Similar to the ADC the RTC of S3C2443 and S3C2416/2450 has some slight
variances when compared to the existing types.

This series adds support for those SoCs.

As with the ADC patches, these changes where tested on S3C2416 hardware.
The S3C2443 quirks are a subset of those and are done according to the
datasheet, but not tested on real hardware (as I do not own a S3C2443
device).

changes since v1:
address comments from Thomas Abraham, reducing number of ifdefs and
duplicate code


Heiko Stuebner (4):
  ARM: SAMSUNG: cleanup of rtc register definitions
  rtc-s3c: make room for more variants in devicetree block
  rtc-s3c: add variants for S3C2443 and S3C2416
  ARM: S3C2443/S3C2416: add s3c_rtc_setname and rename rtc devices

 arch/arm/mach-s3c2416/s3c2416.c               |    2 +
 arch/arm/mach-s3c2443/s3c2443.c               |    2 +
 arch/arm/plat-samsung/include/plat/regs-rtc.h |   92

+++++++++++++++------

---
 arch/arm/plat-samsung/include/plat/rtc-core.h |   27 +++++++
 drivers/rtc/rtc-s3c.c                         |   74 ++++++++++++++++----
 5 files changed, 149 insertions(+), 48 deletions(-)
 create mode 100644 arch/arm/plat-samsung/include/plat/rtc-core.h

--
1.7.5.4

Hi Heiko,

There were small comments on 1st patch and others looks ok to me.
If you're ok on my comments, please re-send it so that I can request to pull
this series to Alessandro or Andrew with my ack.

Thanks.

Best regards,
Kgene.
--
Kukjin Kim [off-list ref], Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.