[PATCH] ARM: S3C64XX: Use software initiated powerdown for Cragganmore
From: Mark Brown <hidden>
Date: 2011-11-08 16:18:51
Subsystem:
arm port, the rest · Maintainers:
Russell King, Linus Torvalds
Since the two PMICs are independent we initiate a shutdown on each. Signed-off-by: Mark Brown <redacted> --- arch/arm/mach-s3c64xx/mach-crag6410.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index b9a052a..3882c2f 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c@@ -501,6 +501,7 @@ static struct wm831x_pdata crag_pmic_pdata __initdata = { .wm831x_num = 1, .irq_base = BANFF_PMIC_IRQ_BASE, .gpio_base = GPIO_BOARD_START + 8, + .soft_shutdown = true, .backup = &banff_backup_pdata,
@@ -605,6 +606,7 @@ static struct wm831x_pdata glenfarclas_pmic_pdata __initdata = { .wm831x_num = 2, .irq_base = GLENFARCLAS_PMIC_IRQ_BASE, .gpio_base = GLENFARCLAS_PMIC_GPIO_BASE, + .soft_shutdown = true, .gpio_defaults = { /* GPIO1-3: IRQ inputs, rising edge triggered, CMOS */
--
1.7.7.1