[PATCHv2] ARM: OMAP: hsmmc: Fix mux for non-OMAP pins
From: Thomas Weber <hidden>
Date: 2011-11-16 18:56:17
Also in:
linux-omap, lkml
Subsystem:
arm port, omap2+ support, the rest · Maintainers:
Russell King, Aaro Koskinen, Andreas Kemnade, Kevin Hilman, Roger Quadros, Tony Lindgren, Linus Torvalds
The Devkit8000 uses a TWL4030 pin for card detection. Thats why the error: _omap_mux_init_gpio: Could not set gpio192 occurs. This patch checks that the pin is on OMAP before calling omap_mux_init_gpio. Signed-off-by: Thomas Weber <redacted> --- Changelog: v2: Remove backslash at end of line arch/arm/mach-omap2/hsmmc.c | 6 ++++-- 1 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index f4a1020..c3aea79 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c@@ -200,10 +200,12 @@ static int nop_mmc_set_power(struct device *dev, int slot, int power_on, static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller, int controller_nr) { - if (gpio_is_valid(mmc_controller->slots[0].switch_pin)) + if (gpio_is_valid(mmc_controller->slots[0].switch_pin) && + (mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES)) omap_mux_init_gpio(mmc_controller->slots[0].switch_pin, OMAP_PIN_INPUT_PULLUP); - if (gpio_is_valid(mmc_controller->slots[0].gpio_wp)) + if (gpio_is_valid(mmc_controller->slots[0].gpio_wp) && + (mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES)) omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp, OMAP_PIN_INPUT_PULLUP); if (cpu_is_omap34xx()) {
--
1.7.7.3