DORMANTno replies

Revision v2 of 3 in this series.

Revisions (3)
  1. v1 [diff vs current]
  2. v2 current
  3. v3 [diff vs current]

[PATCH v2 0/3] AM35x: Adding PM init

From: Abhilash K V <hidden>
Date: 2011-09-08 12:47:21
Also in: linux-omap, lkml

This patch-set fixes the power and voltage management initialization sequence
for AM35x.
These patches are dependent on the following patch-set
	[PATCH v3 0/2] AM3517: Booting up
at http://marc.info/?l=linux-kernel&m=131548351225196&w=2
which gets the AM3517 EVM booting.

The patches are tested on master of tmlind/linux-omap-2.6.git.
Kernel version is 3.1-rc3 and last commit on top of which these patches
were added is:
	b148d763841161894ed6629794064065a834aa2b: Linux-omap rebuilt: Updated to
	use omap_sdrc_init

with the folowing commit reverted:
	f3637a5f2e2eb391ff5757bc83fb5de8f9726464: irq: Always set IRQF_ONESHOT
	if no primary handler is specified

Cc: Sanjeev Premi <redacted>
---
Changes in v2:
  * TWL4030 CORE and POWER drivers are no longer built only for ARM and OMAP
  * changed comments to mark AM35x voltgate-scaling code as ad hoc

Abhilash K V (1):
  OMAP3: Remove auto-selection of PMICs

Sanjeev Premi (2):
  AM35x: voltage: Basic initialization
  OMAP3: Add support for TPS65023 (AM35x only)

 arch/arm/configs/omap2plus_defconfig          |    3 +
 arch/arm/mach-omap2/Kconfig                   |    3 -
 arch/arm/mach-omap2/Makefile                  |    3 +-
 arch/arm/mach-omap2/omap_opp_data.h           |    1 +
 arch/arm/mach-omap2/opp3xxx_data.c            |   10 +++
 arch/arm/mach-omap2/pm.c                      |    4 +-
 arch/arm/mach-omap2/pm.h                      |    9 +++
 arch/arm/mach-omap2/pmic_tps65023.c           |   84 +++++++++++++++++++++++++
 arch/arm/mach-omap2/voltage.c                 |   18 +++++
 arch/arm/mach-omap2/voltagedomains3xxx_data.c |   41 ++++++++++++-
 drivers/mfd/Kconfig                           |    2 +-
 11 files changed, 171 insertions(+), 7 deletions(-)
 create mode 100644 arch/arm/mach-omap2/pmic_tps65023.c
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help