[PATCH 12/12] arm: mach-mmp: brownstone.c support multiple sd slot=

s

Support multiple sd/eMMC interfaces. enable mmc1, 2, and 3.
mmc2 is used eMMC and slot is marked PERMANENT and 8 bit device.
mmc1 is used for Wifi and slot is marked PERMANENT

Note: eMMC (mmc2) is set to initialize first to workaround a problem
where booting in logical order requires mmc create work queue
to be multi-threaded otherwise boot process hangs.  BUG report
send to linux-mmc and linux-kernel mailing list.

Wifi (mmc1) requires we enable power on the device by toggling
the gpio lines for power and reset.

Signed-off-by: Philip Rakity <redacted>
---
 arch/arm/mach-mmp/brownstone.c |   42 ++++++++++++++++++++++++++++++++++++=
++++
 1 files changed, 42 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.=

c
index 7bb78fd..36d5b82 100644

--- a/arch/arm/mach-mmp/brownstone.c
+++ b/arch/arm/mach-mmp/brownstone.c

@@ -19,6 +19,7 @@
 #include <linux/regulator/max8649.h>
 #include <linux/regulator/fixed.h>
 #include <linux/mfd/max8925.h>
+#include <linux/delay.h>

=20
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>

@@ -180,6 +181,45 @@ static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc=

0 =3D {
 	.max_speed	=3D 25000000,
 };
=20
+static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc1 =3D {
+	.flags		=3D PXA_FLAG_CARD_PERMANENT,
+};
+
+static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc2 =3D {
+	.flags		=3D PXA_FLAG_CARD_PERMANENT |
+				PXA_FLAG_SD_8_BIT_CAPABLE_SLOT,
+};
+
+static void __init mmc_sdio_wifi(void)
+{
+	int poweron;
+	int reset;
+
+	poweron =3D mfp_to_gpio(GPIO57_GPIO);
+	reset =3D mfp_to_gpio(GPIO58_GPIO);
+
+	if(gpio_request(reset, "sd8xxx reset")) {
+		printk(KERN_INFO "gpio %d request failed\n", reset);
+		return;
+	}
+
+	if(gpio_request(poweron, "sd8xxx PDn")) {
+		gpio_free(reset);
+		printk(KERN_INFO "gpio %d request failed\n", poweron);
+		return;
+	}
+
+	gpio_direction_output(poweron, 1);
+	msleep (1);
+	gpio_direction_output(reset, 0);
+	msleep (1);
+	gpio_direction_output(reset, 1);
+	gpio_free(reset);
+	gpio_free(poweron);
+
+	mmp2_add_sdhost(1, &mmp2_sdh_platdata_mmc1); /* Wifi */
+}
+
 static void __init brownstone_init(void)
 {
 	mfp_config(ARRAY_AND_SIZE(brownstone_pin_config));

@@ -188,7 +228,9 @@ static void __init brownstone_init(void)
 	mmp2_add_uart(1);
 	mmp2_add_uart(3);
 	mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(brownstone_twsi1_info));
+	mmp2_add_sdhost(2, &mmp2_sdh_platdata_mmc2); /* eMMC */
 	mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */
+	mmc_sdio_wifi();

=20
 	/* enable 5v regulator */
 	platform_device_register(&brownstone_v_5vp_device);
--=20
1.7.0.4