I've just subscribed to the list.
I received my DreamPlug a few days ago. It's up running what it came with and I'd like to help get full Squeeze running on it.
Martin sent me the following so I'm moving this discussion here.
Begin forwarded message:
From: Martin Michlmayr <redacted>
Date: February 11, 2011 12:37:45 PM EST
To: JK Scheinberg <redacted>
Subject: Re: dreamplug cpu
* JK Scheinberg [off-list ref] [2011-02-11 11:47]:
quoted
also, i see they both have exactly the same processor or SOC if it's
called that. if this is merely a repackaging then unless some of
the devices (enet etc) have changed won't the exact same debian
kirkwood dist install and work on this?
It's the same SoC, but it probably has different devices and maybe
some of the GPIOs are different.
I don't know anything about the DreamPlug. Do you know if technical
specs are available online?
What needs to be done is to write a support file for the DreamPlug,
look at sheevaplug-setup.c and guruplug-setup.c here for an example:
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=tree;f=arch/arm/mach-kirkwood;h=222c4a61519a225b2444678a72a6d66edbd1727a;hb=HEAD
Anyway, this should also be moved back to debian-arm so other people
can comment. Or even better, to linux-arm-kernel at lists.infradead.org
(the ARM kernel list).
--
Martin Michlmayr
http://www.cyrius.com/
JK Scheinberg
jk at kimandjk.com
JK Scheinberg [off-list ref] wrote:
I received my DreamPlug a few days ago. It's up running what it came
with and I'd like to help get full Squeeze running on it.
<shameless-self-promo>
http://www.digriz.org.uk/kirkwood
</shameless-self-promo>
Does not answer the 'kernel' question though.
* JK Scheinberg [off-list ref] [2011-02-11 11:47]:
quoted
quoted
also, i see they both have exactly the same processor or SOC if it's
called that. if this is merely a repackaging then unless some of
the devices (enet etc) have changed won't the exact same debian
kirkwood dist install and work on this?
It's the same SoC, but it probably has different devices and maybe
some of the GPIOs are different.
I don't know anything about the DreamPlug. Do you know if technical
specs are available online?
The Globalscale website implies that the NAND is a bit larger
and uboot boots off some separate NOR flash.
http://www.globalscaletechnologies.com/t-dreamplugdetails.aspx
quoted
What needs to be done is to write a support file for the DreamPlug,
look at sheevaplug-setup.c and guruplug-setup.c here for an example:
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=tree;f=arch/arm/mach-kirkwood;h=222c4a61519a225b2444678a72a6d66edbd1727a;hb=HEAD
Boot the DreamPlug and take a copy of the full kernel booting log. Copy
the sheevaplug-setup.c code, strip out *everything* except for the
Serial, NAND[1] and Ethernet ports sections and start from there.
Do prod me off list if you need help.
Cheers
[1] match up the size and partition table to whatever the layout looks
like for the existing installation
--
Alexander Clouter
.sigmonster says: You will win success in whatever calling you adopt.