ARM: i.MX53: spi related patches

7 messages, 3 authors, 2011-01-21 · open the first message on its own page

ARM: i.MX53: spi related patches

From: yong.shen at freescale.com <hidden>
Date: 2011-01-11 12:54:20 

Change log:
1. the spi_imx driver changes are seperated from this patch set and sent to spi dev list
2. addressed comments from Uwe and Sascha
3. Add spi nor device by the way

Yong

[PATCH v2 1/4] ARM: i.MX53: enable spi support

From: yong.shen at freescale.com <hidden>
Date: 2011-01-11 12:54:21 

From: Yong Shen <redacted>

1. register spi clock
2. add macro definitions for spi platform data
3. fix some bugs of register and iomux definition

Signed-off-by: Yong Shen <redacted>
---
 arch/arm/mach-mx5/clock-mx51-mx53.c          |    3 +++
 arch/arm/mach-mx5/devices-imx53.h            |    4 ++++
 arch/arm/plat-mxc/devices/platform-spi_imx.c |   12 ++++++++++++
 arch/arm/plat-mxc/include/mach/iomux-mx53.h  |    6 +++---
 arch/arm/plat-mxc/include/mach/mx53.h        |   10 +++++-----
 5 files changed, 27 insertions(+), 8 deletions(-)

diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c
index d0f58a3..a20d0c0 100644
--- a/arch/arm/mach-mx5/clock-mx51-mx53.c
+++ b/arch/arm/mach-mx5/clock-mx51-mx53.c
@@ -1330,6 +1330,9 @@ static struct clk_lookup mx53_lookups[] = {
 	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
 	_REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk)
 	_REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_clk)
+	_REGISTER_CLOCK("imx53-ecspi.0", NULL, ecspi1_clk)
+	_REGISTER_CLOCK("imx53-ecspi.1", NULL, ecspi2_clk)
+	_REGISTER_CLOCK("imx53-cspi.0", NULL, cspi_clk)
 };
 
 static void clk_tree_init(void)
diff --git a/arch/arm/mach-mx5/devices-imx53.h b/arch/arm/mach-mx5/devices-imx53.h
index f7c89ef..8639735 100644
--- a/arch/arm/mach-mx5/devices-imx53.h
+++ b/arch/arm/mach-mx5/devices-imx53.h
@@ -25,3 +25,7 @@ extern const struct imx_sdhci_esdhc_imx_data
 imx53_sdhci_esdhc_imx_data[] __initconst;
 #define imx53_add_sdhci_esdhc_imx(id, pdata)	\
 	imx_add_sdhci_esdhc_imx(&imx53_sdhci_esdhc_imx_data[id], pdata)
+
+extern const struct imx_spi_imx_data imx53_ecspi_data[] __initconst;
+#define imx53_add_ecspi(id, pdata)	\
+	imx_add_spi_imx(&imx53_ecspi_data[id], pdata)
diff --git a/arch/arm/plat-mxc/devices/platform-spi_imx.c b/arch/arm/plat-mxc/devices/platform-spi_imx.c
index 8ea49ad..013c85f 100644
--- a/arch/arm/plat-mxc/devices/platform-spi_imx.c
+++ b/arch/arm/plat-mxc/devices/platform-spi_imx.c
@@ -81,6 +81,18 @@ const struct imx_spi_imx_data imx51_ecspi_data[] __initconst = {
 };
 #endif /* ifdef CONFIG_SOC_IMX51 */
 
+#ifdef CONFIG_SOC_IMX53
+const struct imx_spi_imx_data imx53_cspi_data __initconst =
+	imx_spi_imx_data_entry_single(MX53, CSPI, "imx53-cspi", 0, , SZ_4K);
+
+const struct imx_spi_imx_data imx53_ecspi_data[] __initconst = {
+#define imx53_ecspi_data_entry(_id, _hwid)				\
+	imx_spi_imx_data_entry(MX53, ECSPI, "imx53-ecspi", _id, _hwid, SZ_4K)
+	imx53_ecspi_data_entry(0, 1),
+	imx53_ecspi_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_SOC_IMX53 */
+
 struct platform_device *__init imx_add_spi_imx(
 		const struct imx_spi_imx_data *data,
 		const struct spi_imx_master *pdata)
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx53.h b/arch/arm/plat-mxc/include/mach/iomux-mx53.h
index 2673007..02f1ff3 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx53.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx53.h
@@ -131,9 +131,9 @@ typedef enum iomux_config {
 #define MX53_PAD_JTAG_TDO__JTAG_TDO		IOMUX_PAD(0x454, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
 #define MX53_PAD_EIM_A25__GPIO_5_2		IOMUX_PAD(0x458, 0x110,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
 #define MX53_PAD_EIM_EB2__GPIO_2_30		IOMUX_PAD(0x45C, 0x114,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D16__GPIO_3_16		IOMUX_PAD(0x460, 0x118,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D17__GPIO_3_17		IOMUX_PAD(0x464, 0x11C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D18__GPIO_3_18		IOMUX_PAD(0x468, 0x120,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D16__GPIO_3_16		IOMUX_PAD(0x460, 0x118,IOMUX_CONFIG_ALT4, 0x79c, 3, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D17__GPIO_3_17		IOMUX_PAD(0x464, 0x11C,IOMUX_CONFIG_ALT4, 0x7a0, 3, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D18__GPIO_3_18		IOMUX_PAD(0x468, 0x120,IOMUX_CONFIG_ALT4, 0x7a4, 3, NO_PAD_CTRL)
 #define MX53_PAD_EIM_D19__GPIO_3_19		IOMUX_PAD(0x46C, 0x124,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
 #define MX53_PAD_EIM_D20__GPIO_3_20		IOMUX_PAD(0x470, 0x128,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
 #define MX53_PAD_EIM_D21__GPIO_3_21		IOMUX_PAD(0x474, 0x12C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
diff --git a/arch/arm/plat-mxc/include/mach/mx53.h b/arch/arm/plat-mxc/include/mach/mx53.h
index 340937f..d7a8e52 100644
--- a/arch/arm/plat-mxc/include/mach/mx53.h
+++ b/arch/arm/plat-mxc/include/mach/mx53.h
@@ -56,7 +56,7 @@
 #define MX53_ESDHC1_BASE_ADDR	(MX53_SPBA0_BASE_ADDR + 0x00004000)
 #define MX53_ESDHC2_BASE_ADDR	(MX53_SPBA0_BASE_ADDR + 0x00008000)
 #define MX53_UART3_BASE_ADDR		(MX53_SPBA0_BASE_ADDR + 0x0000C000)
-#define MX53_CSPI1_BASE_ADDR		(MX53_SPBA0_BASE_ADDR + 0x00010000)
+#define MX53_ECSPI1_BASE_ADDR		(MX53_SPBA0_BASE_ADDR + 0x00010000)
 #define MX53_SSI2_BASE_ADDR		(MX53_SPBA0_BASE_ADDR + 0x00014000)
 #define MX53_ESDHC3_BASE_ADDR	(MX53_SPBA0_BASE_ADDR + 0x00020000)
 #define MX53_ESDHC4_BASE_ADDR	(MX53_SPBA0_BASE_ADDR + 0x00024000)
@@ -117,12 +117,12 @@
 #define MX53_ARM_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000A0000)
 #define MX53_OWIRE_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000A4000)
 #define MX53_FIRI_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000A8000)
-#define MX53_CSPI2_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000AC000)
+#define MX53_ECSPI2_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000AC000)
 #define MX53_SDMA_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000B0000)
 #define MX53_SCC_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000B4000)
 #define MX53_ROMCP_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000B8000)
 #define MX53_RTIC_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000BC000)
-#define MX53_CSPI3_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000C0000)
+#define MX53_CSPI_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000C0000)
 #define MX53_I2C2_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000C4000)
 #define MX53_I2C1_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000C8000)
 #define MX53_SSI1_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000CC000)
@@ -264,8 +264,8 @@
 #define MX53_INT_UART3	33
 #define MX53_INT_RESV34	34
 #define MX53_INT_RESV35	35
-#define MX53_INT_CSPI1	36
-#define MX53_INT_CSPI2	37
+#define MX53_INT_ECSPI1	36
+#define MX53_INT_ECSPI2	37
 #define MX53_INT_CSPI	38
 #define MX53_INT_GPT	39
 #define MX53_INT_EPIT1	40
-- 
1.7.1

[PATCH v2 2/4] ARM: i.MX53 EVK: add spi device

From: yong.shen at freescale.com <hidden>
Date: 2011-01-11 12:54:22 

From: Yong Shen <redacted>

1. add platform data for spi device
2. Kconfig change

Signed-off-by: Yong Shen <redacted>
---
 arch/arm/mach-mx5/Kconfig          |    1 +
 arch/arm/mach-mx5/board-mx53_evk.c |   21 +++++++++++++++++++++
 2 files changed, 22 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
index 23b0e3f..777740b 100644
--- a/arch/arm/mach-mx5/Kconfig
+++ b/arch/arm/mach-mx5/Kconfig
@@ -126,6 +126,7 @@ config MACH_MX53_EVK
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select IMX_HAVE_PLATFORM_SPI_IMX
 	help
 	  Include support for MX53 EVK platform. This includes specific
 	  configurations for the board and its peripherals.
diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c
index 4043451..739bc62 100644
--- a/arch/arm/mach-mx5/board-mx53_evk.c
+++ b/arch/arm/mach-mx5/board-mx53_evk.c
@@ -33,6 +33,8 @@
 #include <mach/iomux-mx53.h>
 
 #define SMD_FEC_PHY_RST		IMX_GPIO_NR(7, 6)
+#define EVK_ECSPI1_CS0		IMX_GPIO_NR(2, 30)
+#define EVK_ECSPI1_CS1		IMX_GPIO_NR(3, 19)
 
 #include "crm_regs.h"
 #include "devices-imx53.h"
@@ -52,6 +54,13 @@ static iomux_v3_cfg_t mx53_evk_pads[] = {
 	MX53_PAD_ATA_CS_1__UART3_RXD,
 	MX53_PAD_ATA_DA_1__UART3_CTS,
 	MX53_PAD_ATA_DA_2__UART3_RTS,
+
+	MX53_PAD_EIM_D16__GPIO_3_16,
+	MX53_PAD_EIM_D17__GPIO_3_17,
+	MX53_PAD_EIM_D18__GPIO_3_18,
+
+	MX53_PAD_EIM_EB2__GPIO_2_30,
+	MX53_PAD_EIM_D19__GPIO_3_19,
 };
 
 static const struct imxuart_platform_data mx53_evk_uart_pdata __initconst = {
@@ -89,6 +98,16 @@ static struct fec_platform_data mx53_evk_fec_pdata = {
 	.phy = PHY_INTERFACE_MODE_RMII,
 };
 
+static int mx53_evk_spi_cs[] = {
+	EVK_ECSPI1_CS0,
+	EVK_ECSPI1_CS1,
+};
+
+static const struct spi_imx_master mx53_evk_spi_data __initconst = {
+	.chipselect     = mx53_evk_spi_cs,
+	.num_chipselect = ARRAY_SIZE(mx53_evk_spi_cs),
+};
+
 static void __init mx53_evk_board_init(void)
 {
 	mxc_iomux_v3_setup_multiple_pads(mx53_evk_pads,
@@ -102,6 +121,8 @@ static void __init mx53_evk_board_init(void)
 
 	imx53_add_sdhci_esdhc_imx(0, NULL);
 	imx53_add_sdhci_esdhc_imx(1, NULL);
+
+	imx53_add_ecspi(0, &mx53_evk_spi_data);
 }
 
 static void __init mx53_evk_timer_init(void)
-- 
1.7.1

[PATCH v2 3/4] ARM: i.MX53 EVK: add spi nor device

From: yong.shen at freescale.com <hidden>
Date: 2011-01-11 12:54:23 

From: Yong Shen <redacted>

add spi board information for spi nor device

Signed-off-by: Yong Shen <redacted>
---
 arch/arm/mach-mx5/board-mx53_evk.c |   15 +++++++++++++++
 1 files changed, 15 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c
index 739bc62..3b0d5ee 100644
--- a/arch/arm/mach-mx5/board-mx53_evk.c
+++ b/arch/arm/mach-mx5/board-mx53_evk.c
@@ -24,6 +24,8 @@
 #include <linux/fec.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -98,6 +100,17 @@ static struct fec_platform_data mx53_evk_fec_pdata = {
 	.phy = PHY_INTERFACE_MODE_RMII,
 };
 
+static struct spi_board_info mx53_evk_spi_board_info[] __initdata = {
+	{
+		.modalias = "mtd_dataflash",
+		.max_speed_hz = 25000000,
+		.bus_num = 0,
+		.chip_select = 1,
+		.mode = SPI_MODE_0,
+		.platform_data = NULL,
+	},
+};
+
 static int mx53_evk_spi_cs[] = {
 	EVK_ECSPI1_CS0,
 	EVK_ECSPI1_CS1,
@@ -122,6 +135,8 @@ static void __init mx53_evk_board_init(void)
 	imx53_add_sdhci_esdhc_imx(0, NULL);
 	imx53_add_sdhci_esdhc_imx(1, NULL);
 
+	spi_register_board_info(mx53_evk_spi_board_info,
+		ARRAY_SIZE(mx53_evk_spi_board_info));
 	imx53_add_ecspi(0, &mx53_evk_spi_data);
 }
 
-- 
1.7.1

[PATCH v2 4/4] ARM: i.MX5: uart clock bug fix

From: yong.shen at freescale.com <hidden>
Date: 2011-01-11 12:54:24 

From: Yong Shen <redacted>

uart clk is from pll3 on mx53 instead of mx51

Signed-off-by: Yong Shen <redacted>
---
 arch/arm/mach-mx5/clock-mx51-mx53.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c
index a20d0c0..3fb7ff8 100644
--- a/arch/arm/mach-mx5/clock-mx51-mx53.c
+++ b/arch/arm/mach-mx5/clock-mx51-mx53.c
@@ -1370,7 +1370,6 @@ int __init mx51_clocks_init(unsigned long ckil, unsigned long osc,
 
 	clk_tree_init();
 
-	clk_set_parent(&uart_root_clk, &pll3_sw_clk);
 	clk_enable(&cpu_clk);
 	clk_enable(&main_bus_clk);
 
@@ -1413,6 +1412,7 @@ int __init mx53_clocks_init(unsigned long ckil, unsigned long osc,
 
 	clk_tree_init();
 
+	clk_set_parent(&uart_root_clk, &pll3_sw_clk);
 	clk_enable(&cpu_clk);
 	clk_enable(&main_bus_clk);
 
-- 
1.7.1

[PATCH v2 1/4] ARM: i.MX53: enable spi support

From: s.hauer@pengutronix.de (Sascha Hauer)
Date: 2011-01-21 10:40:10 

On Tue, Jan 11, 2011 at 08:54:21PM +0800, yong.shen at freescale.com wrote:
From: Yong Shen <redacted>

1. register spi clock
2. add macro definitions for spi platform data
3. fix some bugs of register and iomux definition
As I merged Dinhs patch for full iomux support this one won't apply
anymore. Can you please rebase it onto imx-for-2.6.39?

Sascha
quoted hunk
Signed-off-by: Yong Shen <redacted>
---
 arch/arm/mach-mx5/clock-mx51-mx53.c          |    3 +++
 arch/arm/mach-mx5/devices-imx53.h            |    4 ++++
 arch/arm/plat-mxc/devices/platform-spi_imx.c |   12 ++++++++++++
 arch/arm/plat-mxc/include/mach/iomux-mx53.h  |    6 +++---
 arch/arm/plat-mxc/include/mach/mx53.h        |   10 +++++-----
 5 files changed, 27 insertions(+), 8 deletions(-)

diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c
index d0f58a3..a20d0c0 100644
--- a/arch/arm/mach-mx5/clock-mx51-mx53.c
+++ b/arch/arm/mach-mx5/clock-mx51-mx53.c
@@ -1330,6 +1330,9 @@ static struct clk_lookup mx53_lookups[] = {
 	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
 	_REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk)
 	_REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_clk)
+	_REGISTER_CLOCK("imx53-ecspi.0", NULL, ecspi1_clk)
+	_REGISTER_CLOCK("imx53-ecspi.1", NULL, ecspi2_clk)
+	_REGISTER_CLOCK("imx53-cspi.0", NULL, cspi_clk)
 };
 
 static void clk_tree_init(void)
diff --git a/arch/arm/mach-mx5/devices-imx53.h b/arch/arm/mach-mx5/devices-imx53.h
index f7c89ef..8639735 100644
--- a/arch/arm/mach-mx5/devices-imx53.h
+++ b/arch/arm/mach-mx5/devices-imx53.h
@@ -25,3 +25,7 @@ extern const struct imx_sdhci_esdhc_imx_data
 imx53_sdhci_esdhc_imx_data[] __initconst;
 #define imx53_add_sdhci_esdhc_imx(id, pdata)	\
 	imx_add_sdhci_esdhc_imx(&imx53_sdhci_esdhc_imx_data[id], pdata)
+
+extern const struct imx_spi_imx_data imx53_ecspi_data[] __initconst;
+#define imx53_add_ecspi(id, pdata)	\
+	imx_add_spi_imx(&imx53_ecspi_data[id], pdata)
diff --git a/arch/arm/plat-mxc/devices/platform-spi_imx.c b/arch/arm/plat-mxc/devices/platform-spi_imx.c
index 8ea49ad..013c85f 100644
--- a/arch/arm/plat-mxc/devices/platform-spi_imx.c
+++ b/arch/arm/plat-mxc/devices/platform-spi_imx.c
@@ -81,6 +81,18 @@ const struct imx_spi_imx_data imx51_ecspi_data[] __initconst = {
 };
 #endif /* ifdef CONFIG_SOC_IMX51 */
 
+#ifdef CONFIG_SOC_IMX53
+const struct imx_spi_imx_data imx53_cspi_data __initconst =
+	imx_spi_imx_data_entry_single(MX53, CSPI, "imx53-cspi", 0, , SZ_4K);
+
+const struct imx_spi_imx_data imx53_ecspi_data[] __initconst = {
+#define imx53_ecspi_data_entry(_id, _hwid)				\
+	imx_spi_imx_data_entry(MX53, ECSPI, "imx53-ecspi", _id, _hwid, SZ_4K)
+	imx53_ecspi_data_entry(0, 1),
+	imx53_ecspi_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_SOC_IMX53 */
+
 struct platform_device *__init imx_add_spi_imx(
 		const struct imx_spi_imx_data *data,
 		const struct spi_imx_master *pdata)
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx53.h b/arch/arm/plat-mxc/include/mach/iomux-mx53.h
index 2673007..02f1ff3 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx53.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx53.h
@@ -131,9 +131,9 @@ typedef enum iomux_config {
 #define MX53_PAD_JTAG_TDO__JTAG_TDO		IOMUX_PAD(0x454, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
 #define MX53_PAD_EIM_A25__GPIO_5_2		IOMUX_PAD(0x458, 0x110,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
 #define MX53_PAD_EIM_EB2__GPIO_2_30		IOMUX_PAD(0x45C, 0x114,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D16__GPIO_3_16		IOMUX_PAD(0x460, 0x118,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D17__GPIO_3_17		IOMUX_PAD(0x464, 0x11C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D18__GPIO_3_18		IOMUX_PAD(0x468, 0x120,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D16__GPIO_3_16		IOMUX_PAD(0x460, 0x118,IOMUX_CONFIG_ALT4, 0x79c, 3, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D17__GPIO_3_17		IOMUX_PAD(0x464, 0x11C,IOMUX_CONFIG_ALT4, 0x7a0, 3, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D18__GPIO_3_18		IOMUX_PAD(0x468, 0x120,IOMUX_CONFIG_ALT4, 0x7a4, 3, NO_PAD_CTRL)
 #define MX53_PAD_EIM_D19__GPIO_3_19		IOMUX_PAD(0x46C, 0x124,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
 #define MX53_PAD_EIM_D20__GPIO_3_20		IOMUX_PAD(0x470, 0x128,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
 #define MX53_PAD_EIM_D21__GPIO_3_21		IOMUX_PAD(0x474, 0x12C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
diff --git a/arch/arm/plat-mxc/include/mach/mx53.h b/arch/arm/plat-mxc/include/mach/mx53.h
index 340937f..d7a8e52 100644
--- a/arch/arm/plat-mxc/include/mach/mx53.h
+++ b/arch/arm/plat-mxc/include/mach/mx53.h
@@ -56,7 +56,7 @@
 #define MX53_ESDHC1_BASE_ADDR	(MX53_SPBA0_BASE_ADDR + 0x00004000)
 #define MX53_ESDHC2_BASE_ADDR	(MX53_SPBA0_BASE_ADDR + 0x00008000)
 #define MX53_UART3_BASE_ADDR		(MX53_SPBA0_BASE_ADDR + 0x0000C000)
-#define MX53_CSPI1_BASE_ADDR		(MX53_SPBA0_BASE_ADDR + 0x00010000)
+#define MX53_ECSPI1_BASE_ADDR		(MX53_SPBA0_BASE_ADDR + 0x00010000)
 #define MX53_SSI2_BASE_ADDR		(MX53_SPBA0_BASE_ADDR + 0x00014000)
 #define MX53_ESDHC3_BASE_ADDR	(MX53_SPBA0_BASE_ADDR + 0x00020000)
 #define MX53_ESDHC4_BASE_ADDR	(MX53_SPBA0_BASE_ADDR + 0x00024000)
@@ -117,12 +117,12 @@
 #define MX53_ARM_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000A0000)
 #define MX53_OWIRE_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000A4000)
 #define MX53_FIRI_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000A8000)
-#define MX53_CSPI2_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000AC000)
+#define MX53_ECSPI2_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000AC000)
 #define MX53_SDMA_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000B0000)
 #define MX53_SCC_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000B4000)
 #define MX53_ROMCP_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000B8000)
 #define MX53_RTIC_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000BC000)
-#define MX53_CSPI3_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000C0000)
+#define MX53_CSPI_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000C0000)
 #define MX53_I2C2_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000C4000)
 #define MX53_I2C1_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000C8000)
 #define MX53_SSI1_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000CC000)
@@ -264,8 +264,8 @@
 #define MX53_INT_UART3	33
 #define MX53_INT_RESV34	34
 #define MX53_INT_RESV35	35
-#define MX53_INT_CSPI1	36
-#define MX53_INT_CSPI2	37
+#define MX53_INT_ECSPI1	36
+#define MX53_INT_ECSPI2	37
 #define MX53_INT_CSPI	38
 #define MX53_INT_GPT	39
 #define MX53_INT_EPIT1	40
-- 
1.7.1


-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

[PATCH v2 1/4] ARM: i.MX53: enable spi support

From: Yong Shen <hidden>
Date: 2011-01-21 14:36:24 

Hi Sascha,

On Fri, Jan 21, 2011 at 11:40 AM, Sascha Hauer [off-list ref] wrote:
On Tue, Jan 11, 2011 at 08:54:21PM +0800, yong.shen at freescale.com wrote:
quoted
From: Yong Shen <redacted>

1. register spi clock
2. add macro definitions for spi platform data
3. fix some bugs of register and iomux definition
As I merged Dinhs patch for full iomux support this one won't apply
anymore. Can you please rebase it onto imx-for-2.6.39?
You had already merged latest version (v3 or v4) of this into mainline, see:
467ae1e47fd44c44dd4972780c7a804f45be0fe8
6b2837dc6d7f923bd622049823284b7277ff0558
so we don't need this v2 patch anymore. And it seems that Dinh's iomux
definitions are also compatible with spi iomux.

Yong


Sascha
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help