[PATCH v6 00/10] OMAP: Adding Smartreflex and Voltage driver support

Tony Lindgren [off-list ref] writes:

* Kevin Hilman [off-list ref] [101220 17:05]:

quoted

Thara Gopinath [off-list ref] writes:

quoted

This patch series introduces smartreflex and voltage driver support
for OMAP3430 and OMAP3630. SmartReflex modules do adaptive voltage
control for real-time voltage adjustments.

Thanks Thara, these are looking good for 2.6.38.

Tony, unless there are major objections, I'll be queuing these two SR
series for 2.6.38.  They have dependencies on Paul's integration branch

Well looking at patch 3/6 I think it should live under drivers somewhere
and mostly be compiled as a module. Probably the only change needed
for that is to not call cpu_is_omapxxxx but instead use some flags
passed in the platform_data. Otherwise the whole series looks OK to me.

Moving this to be a regulator driver is part of the medium-term plan,
and is already under development.  For this phase, we just split up the
current driver into device and driver code and left under mach-omap2.
We are investigating (and making) changes to the regulator core so that
SmartReflex can be converted into a real regulator driver, but that is
still under development.

So, in the mean time, I'd like to merge this version so that other
development that depends on this (the regulator work mentioned above,
the DVFS work, etc.) can have a stable starting point.

Kevin

* Kevin Hilman [off-list ref] [101221 08:17]:

Tony Lindgren [off-list ref] writes:

quoted

* Kevin Hilman [off-list ref] [101220 17:05]:

quoted

Thara Gopinath [off-list ref] writes:

quoted

This patch series introduces smartreflex and voltage driver support
for OMAP3430 and OMAP3630. SmartReflex modules do adaptive voltage
control for real-time voltage adjustments.

Thanks Thara, these are looking good for 2.6.38.

Tony, unless there are major objections, I'll be queuing these two SR
series for 2.6.38.  They have dependencies on Paul's integration branch

Well looking at patch 3/6 I think it should live under drivers somewhere
and mostly be compiled as a module. Probably the only change needed
for that is to not call cpu_is_omapxxxx but instead use some flags
passed in the platform_data. Otherwise the whole series looks OK to me.

Moving this to be a regulator driver is part of the medium-term plan,
and is already under development.  For this phase, we just split up the
current driver into device and driver code and left under mach-omap2.
We are investigating (and making) changes to the regulator core so that
SmartReflex can be converted into a real regulator driver, but that is
still under development.

So, in the mean time, I'd like to merge this version so that other
development that depends on this (the regulator work mentioned above,
the DVFS work, etc.) can have a stable starting point.

OK up to you.

Tony