[PATCH 05/29] pxa3xx_nand: set oob length in the runtime
From: Lei Wen <hidden>
Date: 2010-06-22 13:01:04
Subsystem:
memory technology devices (mtd), nand flash subsystem, the rest · Maintainers:
Miquel Raynal, Richard Weinberger, Vignesh Raghavendra, Linus Torvalds
For different command need different oob requirement, set the proper oob length by different cmd. Signed-off-by: Lei Wen <redacted> --- drivers/mtd/nand/pxa3xx_nand.c | 25 ++++++++++++++++++------- 1 files changed, 18 insertions(+), 7 deletions(-)
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index 50e08db..26c0286 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c@@ -274,13 +274,20 @@ static int wait_for_event(structpxa3xx_nand_info *info, uint32_t event)
static void pxa3xx_set_datasize(struct pxa3xx_nand_info *info)
{
- /* calculate data size */
+ int oob_enable = info->reg_ndcr & NDCR_SPARE_EN;
+
+ info->data_size = info->page_size;
+ if (!oob_enable) {
+ info->oob_size = 0;
+ return;
+ }
+
switch (info->page_size) {
case 2048:
- info->data_size = (info->use_ecc) ? 2088 : 2112;
+ info->oob_size = (info->use_ecc) ? 40 : 64;
break;
case 512:
- info->data_size = (info->use_ecc) ? 520 : 528;
+ info->oob_size = (info->use_ecc) ? 8 : 16;
break;
}
}@@ -334,6 +341,7 @@ static int prepare_other_cmd(structpxa3xx_nand_info *info, uint16_t cmd)
info->ndcb1 = 0;
info->ndcb2 = 0;
+ info->oob_size = 0;
if (cmd == cmdset->read_id) {
info->ndcb0 |= NDCB0_CMD_TYPE(3);
info->data_size = 8;@@ -402,6 +410,9 @@ static int handle_data_pio(struct pxa3xx_nand_info *info) case STATE_PIO_WRITING: __raw_writesl(info->mmio_base + NDDB, info->data_buff, DIV_ROUND_UP(info->data_size, 4)); + if (info->oob_size > 0) + __raw_writesl(info->mmio_base + NDDB, info->oob_buff, + DIV_ROUND_UP(info->oob_size, 4)); enable_int(info, NDSR_CS0_BBD | NDSR_CS0_CMDD);
@@ -414,6 +425,9 @@ static int handle_data_pio(struct pxa3xx_nand_info *info) case STATE_PIO_READING: __raw_readsl(info->mmio_base + NDDB, info->data_buff, DIV_ROUND_UP(info->data_size, 4)); + if (info->oob_size > 0) + __raw_readsl(info->mmio_base + NDDB, info->oob_buff, + DIV_ROUND_UP(info->oob_size, 4)); break; default:
@@ -429,7 +443,7 @@ static int handle_data_pio(struct pxa3xx_nand_info *info) static void start_data_dma(struct pxa3xx_nand_info *info, int dir_out) { struct pxa_dma_desc *desc = info->data_desc; - int dma_len = ALIGN(info->data_size, 32); + int dma_len = ALIGN(info->data_size + info->oob_size, 32); desc->ddadr = DDADR_STOP; desc->dcmd = DCMD_ENDIRQEN | DCMD_WIDTH4 | DCMD_BURST32 | dma_len;
@@ -835,7 +849,6 @@ static int pxa3xx_nand_config_flash(structpxa3xx_nand_info *info, info->cmdset = f->cmdset; info->page_size = f->page_size; info->oob_buff = info->data_buff + f->page_size; - info->oob_size = (f->page_size == 2048) ? 64 : 16; info->read_id_bytes = (f->page_size == 2048) ? 4 : 2; /* calculate addressing information */
@@ -894,8 +907,6 @@ static int pxa3xx_nand_detect_config(structpxa3xx_nand_info *info) i = __ffs(page_per_block * info->page_size); num_blocks = type->chipsize << (20 - i); - info->oob_size = (info->page_size == 2048) ? 64 : 16; - /* calculate addressing information */ info->col_addr_cycles = (info->page_size == 2048) ? 2 : 1; -- 1.7.0.4