[PATCH v2 0/4] Clean up some long arch conditionals

@@ -38,6 +38,7 @@ config ARM
 	select HARDIRQS_SW_RESEND
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
+	select HAVE_UID16
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select HARDIRQS_SW_RESEND
 	select CPU_PM if (SUSPEND || CPU_IDLE)

@@ -193,6 +193,7 @@ config COMPAT
 	bool "Kernel support for 32-bit EL0"
 	depends on !ARM64_64K_PAGES
 	select COMPAT_BINFMT_ELF
+	select HAVE_UID16
 	help
 	  This option enables support for a 32-bit EL0 running under a 64-bit
 	  kernel at EL1. AArch32-specific components such as system calls,

@@ -33,6 +33,7 @@ config BLACKFIN
 	select HAVE_PERF_EVENTS
 	select ARCH_HAVE_CUSTOM_GPIO_H
 	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select HAVE_UID16
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_ATOMIC64

@@ -42,6 +42,7 @@ config CRIS
 	select HAVE_IDE
 	select GENERIC_ATOMIC64
 	select HAVE_GENERIC_HARDIRQS
+	select HAVE_UID16
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select GENERIC_IRQ_SHOW
 	select GENERIC_IOMAP

@@ -5,6 +5,7 @@ config FRV
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_IRQ_WORK
 	select HAVE_PERF_EVENTS
+	select HAVE_UID16
 	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_IRQ_SHOW
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG

@@ -3,6 +3,7 @@ config H8300
 	default y
 	select HAVE_IDE
 	select HAVE_GENERIC_HARDIRQS
+	select HAVE_UID16
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select GENERIC_IRQ_SHOW
 	select GENERIC_CPU_DEVICES

@@ -6,6 +6,7 @@ config M68K
 	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_IRQ_SHOW
 	select GENERIC_ATOMIC64
+	select HAVE_UID16
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS
 	select GENERIC_CPU_DEVICES
 	select GENERIC_STRNCPY_FROM_USER if MMU

@@ -126,6 +126,7 @@ config S390
 	select ARCH_INLINE_WRITE_UNLOCK_BH
 	select ARCH_INLINE_WRITE_UNLOCK_IRQ
 	select ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE
+	select HAVE_UID16 if 32BIT
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_TIME_VSYSCALL

@@ -21,6 +21,7 @@ config SUPERH
 	select HAVE_KERNEL_LZMA
 	select HAVE_KERNEL_XZ
 	select HAVE_KERNEL_LZO
+	select HAVE_UID16
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_REGS_AND_STACK_ACCESS_API

@@ -42,6 +42,7 @@ config SPARC32
 	def_bool !64BIT
 	select GENERIC_ATOMIC64
 	select CLZ_TAB
+	select HAVE_UID16
 
 config SPARC64
 	def_bool 64BIT

@@ -571,6 +572,7 @@ config COMPAT
 	depends on SPARC64
 	default y
 	select COMPAT_BINFMT_ELF
+	select HAVE_UID16
 	select ARCH_WANT_OLD_COMPAT_IPC
 
 config SYSVIPC_COMPAT

@@ -7,6 +7,7 @@ config UML
 	bool
 	default y
 	select HAVE_GENERIC_HARDIRQS
+	select HAVE_UID16
 	select GENERIC_IRQ_SHOW
 	select GENERIC_CPU_DEVICES
 	select GENERIC_IO

@@ -10,6 +10,7 @@ config X86_32
 	def_bool y
 	depends on !64BIT
 	select CLKSRC_I8253
+	select HAVE_UID16
 
 config X86_64
 	def_bool y

@@ -2173,6 +2174,7 @@ config IA32_EMULATION
 	bool "IA32 Emulation"
 	depends on X86_64
 	select COMPAT_BINFMT_ELF
+	select HAVE_UID16
 	---help---
 	  Include code to run legacy 32-bit programs under a
 	  64-bit kernel. You should likely turn this on, unless you're

@@ -1125,10 +1125,12 @@ menuconfig EXPERT
           environments which can tolerate a "non-standard" kernel.
           Only use this if you really know what you are doing.
 
+config HAVE_UID16
+	bool
+
 config UID16
 	bool "Enable 16-bit UID system calls" if EXPERT
-	depends on ARM || BLACKFIN || CRIS || FRV || H8300 || X86_32 || M68K || (S390 && !64BIT) || SUPERH || SPARC32 || (SPARC64 && COMPAT) || UML || (X86_64 && IA32_EMULATION) \
-		|| AARCH32_EMULATION
+	depends on HAVE_UID16
 	default y
 	help
 	  This enables the legacy 16-bit UID syscall wrappers.

@@ -24,6 +24,7 @@ config ARM
 	select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL)
 	select ARCH_BINFMT_ELF_RANDOMIZE_PIE
 	select HAVE_GENERIC_DMA_COHERENT
+	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_LZO
 	select HAVE_KERNEL_LZMA

@@ -10,6 +10,7 @@ config ARM64
 	select GENERIC_TIME_VSYSCALL
 	select HARDIRQS_SW_RESEND
 	select HAVE_ARCH_TRACEHOOK
+	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_DMA_API_DEBUG
 	select HAVE_DMA_ATTRS
 	select HAVE_GENERIC_DMA_COHERENT

@@ -16,6 +16,7 @@ config MICROBLAZE
 	select OF
 	select OF_EARLY_FLATTREE
 	select ARCH_WANT_IPC_PARSE_VERSION
+	select HAVE_DEBUG_KMEMLEAK
 	select IRQ_DOMAIN
 	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_IRQ_PROBE

@@ -17,6 +17,7 @@ config MIPS
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_KPROBES
 	select HAVE_KRETPROBES
+	select HAVE_DEBUG_KMEMLEAK
 	select ARCH_BINFMT_ELF_RANDOMIZE_PIE
 	select RTC_LIB if !MACH_LOONGSON
 	select GENERIC_ATOMIC64 if !64BIT

@@ -113,6 +113,7 @@ config PPC
 	select HAVE_DMA_API_DEBUG
 	select USE_GENERIC_SMP_HELPERS if SMP
 	select HAVE_OPROFILE
+	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_SYSCALL_WRAPPERS if PPC64
 	select GENERIC_ATOMIC64 if PPC32
 	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE

@@ -80,6 +80,7 @@ config S390
 	select HAVE_IRQ_WORK
 	select HAVE_PERF_EVENTS
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
+	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_BZIP2
 	select HAVE_KERNEL_LZMA

@@ -16,6 +16,7 @@ config SUPERH
 	select ARCH_HAVE_CUSTOM_GPIO_H
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG if (GUSA_RB || CPU_SH4A)
 	select PERF_USE_VMALLOC
+	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_BZIP2
 	select HAVE_KERNEL_LZMA

@@ -60,6 +60,7 @@ config SPARC64
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_FTRACE_MCOUNT_RECORD
 	select HAVE_SYSCALL_TRACEPOINTS
+	select HAVE_DEBUG_KMEMLEAK
 	select RTC_DRV_CMOS
 	select RTC_DRV_BQ4802
 	select RTC_DRV_SUN4V

@@ -9,6 +9,7 @@ config TILE
 	select GENERIC_FIND_FIRST_BIT
 	select USE_GENERIC_SMP_HELPERS
 	select CC_OPTIMIZE_FOR_SIZE
+	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_IRQ_PROBE
 	select GENERIC_PENDING_IRQ if SMP

@@ -66,6 +66,7 @@ config X86
 	select HAVE_PERF_EVENTS_NMI
 	select HAVE_PERF_REGS
 	select HAVE_PERF_USER_STACK_DUMP
+	select HAVE_DEBUG_KMEMLEAK
 	select ANON_INODES
 	select HAVE_ALIGNED_STRUCT_PAGE if SLUB && !M386
 	select HAVE_CMPXCHG_LOCAL if !M386

@@ -449,12 +449,12 @@ config SLUB_STATS
 	  out which slabs are relevant to a particular load.
 	  Try running: slabinfo -DA
 
+config HAVE_DEBUG_KMEMLEAK
+	bool
+
 config DEBUG_KMEMLEAK
 	bool "Kernel memory leak detector"
-	depends on DEBUG_KERNEL && EXPERIMENTAL && \
-		(X86 || ARM || PPC || MIPS || S390 || SPARC64 || SUPERH || \
-		 MICROBLAZE || TILE || ARM64)
-
+	depends on DEBUG_KERNEL && EXPERIMENTAL && HAVE_DEBUG_KMEMLEAK
 	select DEBUG_FS
 	select STACKTRACE if STACKTRACE_SUPPORT
 	select KALLSYMS

@@ -28,6 +28,7 @@ config ARM64
 	select PERF_USE_VMALLOC
 	select RTC_LIB
 	select SPARSE_IRQ
+	select SYSCTL_EXCEPTION_TRACE
 	help
 	  ARM 64-bit (AArch64) Linux support.
 

@@ -99,6 +99,7 @@ config PPC
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_FUNCTION_TRACER
 	select HAVE_FUNCTION_GRAPH_TRACER
+	select SYSCTL_EXCEPTION_TRACE
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select HAVE_IDE
 	select HAVE_IOREMAP_PROT

@@ -68,6 +68,7 @@ config S390
 	select HAVE_FTRACE_MCOUNT_RECORD
 	select HAVE_C_RECORDMCOUNT
 	select HAVE_SYSCALL_TRACEPOINTS
+	select SYSCTL_EXCEPTION_TRACE
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_REGS_AND_STACK_ACCESS_API

@@ -18,6 +18,7 @@ config SPARC
 	select HAVE_OPROFILE
 	select HAVE_ARCH_KGDB if !SMP || SPARC64
 	select HAVE_ARCH_TRACEHOOK
+	select SYSCTL_EXCEPTION_TRACE
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select RTC_CLASS
 	select RTC_DRV_M48T59

@@ -7,6 +7,7 @@ config TILE
 	select HAVE_DMA_API_DEBUG
 	select HAVE_KVM if !TILEGX
 	select GENERIC_FIND_FIRST_BIT
+	select SYSCTL_EXCEPTION_TRACE
 	select USE_GENERIC_SMP_HELPERS
 	select CC_OPTIMIZE_FOR_SIZE
 	select HAVE_DEBUG_KMEMLEAK

@@ -47,6 +47,7 @@ config X86
 	select HAVE_FUNCTION_GRAPH_FP_TEST
 	select HAVE_FUNCTION_TRACE_MCOUNT_TEST
 	select HAVE_SYSCALL_TRACEPOINTS
+	select SYSCTL_EXCEPTION_TRACE
 	select HAVE_KVM
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_TRACEHOOK

@@ -1152,6 +1152,11 @@ config SYSCTL_SYSCALL
 
 	  If unsure say N here.
 
+config SYSCTL_EXCEPTION_TRACE
+	bool
+	help
+	  Enable support for /proc/sys/debug/exception-trace.
+
 config KALLSYMS
 	 bool "Load all symbols for debugging/ksymoops" if EXPERT
 	 default y

@@ -1543,8 +1543,7 @@ static struct ctl_table fs_table[] = {
 };
 
 static struct ctl_table debug_table[] = {
-#if defined(CONFIG_X86) || defined(CONFIG_PPC) || defined(CONFIG_SPARC) || \
-    defined(CONFIG_S390) || defined(CONFIG_TILE) || defined(CONFIG_ARM64)
+#ifdef CONFIG_SYSCTL_EXCEPTION_TRACE
 	{
 		.procname	= "exception-trace",
 		.data		= &show_unhandled_signals,

@@ -10,6 +10,7 @@ config ARM64
 	select GENERIC_TIME_VSYSCALL
 	select HARDIRQS_SW_RESEND
 	select HAVE_ARCH_TRACEHOOK
+	select HAVE_DEBUG_BUGVERBOSE
 	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_DMA_API_DEBUG
 	select HAVE_DMA_ATTRS

@@ -8,6 +8,7 @@ config FRV
 	select HAVE_UID16
 	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_IRQ_SHOW
+	select HAVE_DEBUG_BUGVERBOSE
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
 	select GENERIC_CPU_DEVICES
 	select ARCH_WANT_IPC_PARSE_VERSION

@@ -8,6 +8,7 @@ config M32R
 	select HAVE_KERNEL_BZIP2
 	select HAVE_KERNEL_LZMA
 	select ARCH_WANT_IPC_PARSE_VERSION
+	select HAVE_DEBUG_BUGVERBOSE
 	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW

@@ -3,6 +3,7 @@ config M68K
 	default y
 	select HAVE_IDE
 	select HAVE_AOUT if MMU
+	select HAVE_DEBUG_BUGVERBOSE
 	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_IRQ_SHOW
 	select GENERIC_ATOMIC64

@@ -13,6 +13,7 @@ config SUPERH
 	select HAVE_DMA_ATTRS
 	select HAVE_IRQ_WORK
 	select HAVE_PERF_EVENTS
+	select HAVE_DEBUG_BUGVERBOSE
 	select ARCH_HAVE_CUSTOM_GPIO_H
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG if (GUSA_RB || CPU_SH4A)
 	select PERF_USE_VMALLOC

@@ -32,6 +32,7 @@ config SPARC
 	select GENERIC_PCI_IOMAP
 	select HAVE_NMI_WATCHDOG if SPARC64
 	select HAVE_BPF_JIT
+	select HAVE_DEBUG_BUGVERBOSE
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_CMOS_UPDATE
 	select GENERIC_CLOCKEVENTS

@@ -14,6 +14,7 @@ config TILE
 	select GENERIC_IRQ_PROBE
 	select GENERIC_PENDING_IRQ if SMP
 	select GENERIC_IRQ_SHOW
+	select HAVE_DEBUG_BUGVERBOSE
 	select HAVE_SYSCALL_WRAPPERS if TILEGX
 	select SYS_HYPERVISOR
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG

@@ -750,12 +750,12 @@ config DEBUG_HIGHMEM
 	  This options enables addition error checking for high memory systems.
 	  Disable for production systems.
 
+config HAVE_DEBUG_BUGVERBOSE
+	bool
+
 config DEBUG_BUGVERBOSE
 	bool "Verbose BUG() reporting (adds 70K)" if DEBUG_KERNEL && EXPERT
-	depends on BUG
-	depends on ARM || AVR32 || M32R || M68K || SPARC32 || SPARC64 || \
-		   FRV || SUPERH || GENERIC_BUG || BLACKFIN || MN10300 || \
-		   TILE || ARM64
+	depends on BUG && (GENERIC_BUG || HAVE_DEBUG_BUGVERBOSE)
 	default y
 	help
 	  Say Y here to make BUG() panics output the file name and line number