# Re: \[PATCH for-next\] scsi: Implement host state statistics

- From: Steffen Maier \<hidden\>
- Date: 2023-03-17 16:53:11 
- List: linux-api
- Page: https://ratatoskr.run/linux-api/2023/03/2138231
- Thread: https://ratatoskr.run/linux-api/2023/03/2134256/t.md

```text
On 3/15/23 23:41, Seymour, Shane M wrote:
>> On Wed, Mar 15, 2023 at 06:08:19AM +0000, Seymour, Shane M wrote:
>>> The following patch implements host state statistics via sysfs. The intent
>>> is to allow user space to see the state changes and be able to report when
>>> a host changes state. The files do not separate out the time spent into
>>> each state but only into three:
>>
>> Why does userspace care about these things at all?  What tool needs them
>> and what can userspace do with the information?
>>
>
> In enterprise setups you may a significant number of LUNs presented to a
> system (100s to 1000s) via a single HBA (usually via FC). Having a HBA going
> into error handling causes issues. Every time a host goes into SCSI EH all
> I/O to that host is blocked until SCSI EH completes. That means waiting for
> every I/O to either complete or timeout before starting any recovery
> processing.
>
> At this time there is no way for anything outside of the kernel to know if a
> HBA is having any issues. The cause of those issues can vary significantly,
> just two examples:
>
> 1) Storage end point issues
> 2) SAN issues (e.g. laser transmit power at any point in the SAN)
>
> My experience with downstream distros is that nobody seems to notice the
> noise that SCSI EH produces (LUN, device, bus, host resets) and we see it
> when we get a vmcore and have to try and work out what caused an I/O hang.

I hear you. Especially, the fact that the very desirable asynchronous aborts and even eh with escalations seems pretty much silent as long as a SCSI command succeeds within one of the allowed retries. I suspect this was done in order not to unsettle users by showing intermediate recovery, which can still lead to successful I/O eventually.

FWIW, at some point we figured out a nice scsi_logging_level of 4605, in order to see any problems with lun probing ("why don't I get my volume in Linux?") or timeouts/aborts/eh ("why are things so slow?") without producing kernel messages for regular good I/O. Of course, it's not set by default, but can be dynamically set if one suspects such problems.

> I wanted to be more proactive in warning users that you've got a potential
> storage issue you need to look at. It won't help when you have a sudden
> massive issue but if you have an issue that is slowly getting worse over
> a period of time you will at least get some warning.
>
>>>
>>> A (GPLv2) program called hostmond will be released in a few months that
>>> will monitor these interfaces and report (local host only via syslog(3C))
>>> when hosts change state.
>>
>> We kind of need to see this before the kernel changes can be accepted
>> for obvious reasons, what is preventing that from happening now?
>
> If you don't mind I'll answer this in my reply to James' email soon since
> he commented about this.
>
>>
>> Please always use sysfs_emit() instead of the crazy scnprintf() for
>> sysfs entries.
>
> No problem I can make that change.
>
>>
>> u32 is a kernel type, not uint32_t please, but I don't know what the
>> scsi layer is used to.
>
> No problem I can make that change.
>
>>
>> thanks,
>>
>> greg k-h
>
> Thank you for your willingness to provide feedback.
>
> Shane

-- 
Mit freundlichen Gruessen / Kind regards
Steffen Maier

Linux on IBM Z and LinuxONE

https://www.ibm.com/privacy/us/en/
IBM Deutschland Research & Development GmbH
Vorsitzender des Aufsichtsrats: Gregor Pillen
Geschaeftsfuehrung: David Faller
Sitz der Gesellschaft: Boeblingen
Registergericht: Amtsgericht Stuttgart, HRB 243294

```
