[PATCH RESEND] thermal/drivers/netlink: Add the temperature when crossing a trip point

STALE1748d LANDED: 7 (7M)

1 review trailer; landed in mainline as fc656fa14da7 on 2021-10-07.

3 messages, 2 authors, 2021-10-06 · open the first message on its own page

[PATCH RESEND] thermal/drivers/netlink: Add the temperature when crossing a trip point

From: Daniel Lezcano <hidden>
Date: 2021-10-01 22:33:54

The slope of the temperature increase or decrease can be high and when
the temperature crosses the trip point, there could be a significant
difference between the trip temperature and the measured temperatures.

That forces the userspace to read the temperature back right after
receiving a trip violation notification.

In order to be efficient, give the temperature which resulted in the
trip violation.

Signed-off-by: Daniel Lezcano <redacted>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
---
 drivers/thermal/thermal_core.c    |  6 ++++--
 drivers/thermal/thermal_netlink.c | 11 ++++++-----
 drivers/thermal/thermal_netlink.h |  8 ++++----
 3 files changed, 14 insertions(+), 11 deletions(-)

diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index 51374f4e1cca..9e243d9f929e 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c

@@ -375,10 +375,12 @@ static void handle_thermal_trip(struct thermal_zone_device *tz, int trip)
 	if (tz->last_temperature != THERMAL_TEMP_INVALID) {
 		if (tz->last_temperature < trip_temp &&
 		    tz->temperature >= trip_temp)
-			thermal_notify_tz_trip_up(tz->id, trip);
+			thermal_notify_tz_trip_up(tz->id, trip,
+						  tz->temperature);
 		if (tz->last_temperature >= trip_temp &&
 		    tz->temperature < (trip_temp - hyst))
-			thermal_notify_tz_trip_down(tz->id, trip);
+			thermal_notify_tz_trip_down(tz->id, trip,
+						    tz->temperature);
 	}
 
 	if (type == THERMAL_TRIP_CRITICAL || type == THERMAL_TRIP_HOT)

diff --git a/drivers/thermal/thermal_netlink.c b/drivers/thermal/thermal_netlink.c
index 1234dbe95895..a16dd4d5d710 100644
--- a/drivers/thermal/thermal_netlink.c
+++ b/drivers/thermal/thermal_netlink.c

@@ -121,7 +121,8 @@ static int thermal_genl_event_tz(struct param *p)
 static int thermal_genl_event_tz_trip_up(struct param *p)
 {
 	if (nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_ID, p->tz_id) ||
-	    nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_TRIP_ID, p->trip_id))
+	    nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_TRIP_ID, p->trip_id) ||
+	    nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_TEMP, p->temp))
 		return -EMSGSIZE;
 
 	return 0;

@@ -285,16 +286,16 @@ int thermal_notify_tz_disable(int tz_id)
 	return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_DISABLE, &p);
 }
 
-int thermal_notify_tz_trip_down(int tz_id, int trip_id)
+int thermal_notify_tz_trip_down(int tz_id, int trip_id, int temp)
 {
-	struct param p = { .tz_id = tz_id, .trip_id = trip_id };
+	struct param p = { .tz_id = tz_id, .trip_id = trip_id, .temp = temp };
 
 	return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_TRIP_DOWN, &p);
 }
 
-int thermal_notify_tz_trip_up(int tz_id, int trip_id)
+int thermal_notify_tz_trip_up(int tz_id, int trip_id, int temp)
 {
-	struct param p = { .tz_id = tz_id, .trip_id = trip_id };
+	struct param p = { .tz_id = tz_id, .trip_id = trip_id, .temp = temp };
 
 	return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_TRIP_UP, &p);
 }

diff --git a/drivers/thermal/thermal_netlink.h b/drivers/thermal/thermal_netlink.h
index 828d1dddfa98..e554f76291f4 100644
--- a/drivers/thermal/thermal_netlink.h
+++ b/drivers/thermal/thermal_netlink.h

@@ -11,8 +11,8 @@ int thermal_notify_tz_create(int tz_id, const char *name);
 int thermal_notify_tz_delete(int tz_id);
 int thermal_notify_tz_enable(int tz_id);
 int thermal_notify_tz_disable(int tz_id);
-int thermal_notify_tz_trip_down(int tz_id, int id);
-int thermal_notify_tz_trip_up(int tz_id, int id);
+int thermal_notify_tz_trip_down(int tz_id, int id, int temp);
+int thermal_notify_tz_trip_up(int tz_id, int id, int temp);
 int thermal_notify_tz_trip_delete(int tz_id, int id);
 int thermal_notify_tz_trip_add(int tz_id, int id, int type,
 			       int temp, int hyst);

@@ -49,12 +49,12 @@ static inline int thermal_notify_tz_disable(int tz_id)
 	return 0;
 }
 
-static inline int thermal_notify_tz_trip_down(int tz_id, int id)
+static inline int thermal_notify_tz_trip_down(int tz_id, int id, int temp)
 {
 	return 0;
 }
 
-static inline int thermal_notify_tz_trip_up(int tz_id, int id)
+static inline int thermal_notify_tz_trip_up(int tz_id, int id, int temp)
 {
 	return 0;
 }

-- 
2.25.1

Re: [PATCH RESEND] thermal/drivers/netlink: Add the temperature when crossing a trip point

From: "Rafael J. Wysocki" <rafael@kernel.org>
Date: 2021-10-05 15:21:03

On Sat, Oct 2, 2021 at 12:33 AM Daniel Lezcano
[off-list ref] wrote:

The slope of the temperature increase or decrease can be high and when
the temperature crosses the trip point, there could be a significant
difference between the trip temperature and the measured temperatures.

That forces the userspace to read the temperature back right after
receiving a trip violation notification.

In order to be efficient, give the temperature which resulted in the
trip violation.

Signed-off-by: Daniel Lezcano <redacted>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

This looks fine to me too.

quoted hunk

---
 drivers/thermal/thermal_core.c    |  6 ++++--
 drivers/thermal/thermal_netlink.c | 11 ++++++-----
 drivers/thermal/thermal_netlink.h |  8 ++++----
 3 files changed, 14 insertions(+), 11 deletions(-)

diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index 51374f4e1cca..9e243d9f929e 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c

@@ -375,10 +375,12 @@ static void handle_thermal_trip(struct thermal_zone_device *tz, int trip)
        if (tz->last_temperature != THERMAL_TEMP_INVALID) {
                if (tz->last_temperature < trip_temp &&
                    tz->temperature >= trip_temp)
-                       thermal_notify_tz_trip_up(tz->id, trip);
+                       thermal_notify_tz_trip_up(tz->id, trip,
+                                                 tz->temperature);
                if (tz->last_temperature >= trip_temp &&
                    tz->temperature < (trip_temp - hyst))
-                       thermal_notify_tz_trip_down(tz->id, trip);
+                       thermal_notify_tz_trip_down(tz->id, trip,
+                                                   tz->temperature);

While at it, I'm not sure if all of the additional line breaks due to
the line length limit are really necessary.  The code would be easier
to follow without them IMV.

quoted hunk

        }

        if (type == THERMAL_TRIP_CRITICAL || type == THERMAL_TRIP_HOT)

diff --git a/drivers/thermal/thermal_netlink.c b/drivers/thermal/thermal_netlink.c
index 1234dbe95895..a16dd4d5d710 100644
--- a/drivers/thermal/thermal_netlink.c
+++ b/drivers/thermal/thermal_netlink.c

@@ -121,7 +121,8 @@ static int thermal_genl_event_tz(struct param *p)
 static int thermal_genl_event_tz_trip_up(struct param *p)
 {
        if (nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_ID, p->tz_id) ||
-           nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_TRIP_ID, p->trip_id))
+           nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_TRIP_ID, p->trip_id) ||
+           nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_TEMP, p->temp))
                return -EMSGSIZE;

        return 0;

@@ -285,16 +286,16 @@ int thermal_notify_tz_disable(int tz_id)
        return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_DISABLE, &p);
 }

-int thermal_notify_tz_trip_down(int tz_id, int trip_id)
+int thermal_notify_tz_trip_down(int tz_id, int trip_id, int temp)
 {
-       struct param p = { .tz_id = tz_id, .trip_id = trip_id };
+       struct param p = { .tz_id = tz_id, .trip_id = trip_id, .temp = temp };

        return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_TRIP_DOWN, &p);
 }

-int thermal_notify_tz_trip_up(int tz_id, int trip_id)
+int thermal_notify_tz_trip_up(int tz_id, int trip_id, int temp)
 {
-       struct param p = { .tz_id = tz_id, .trip_id = trip_id };
+       struct param p = { .tz_id = tz_id, .trip_id = trip_id, .temp = temp };

        return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_TRIP_UP, &p);
 }

diff --git a/drivers/thermal/thermal_netlink.h b/drivers/thermal/thermal_netlink.h
index 828d1dddfa98..e554f76291f4 100644
--- a/drivers/thermal/thermal_netlink.h
+++ b/drivers/thermal/thermal_netlink.h

@@ -11,8 +11,8 @@ int thermal_notify_tz_create(int tz_id, const char *name);
 int thermal_notify_tz_delete(int tz_id);
 int thermal_notify_tz_enable(int tz_id);
 int thermal_notify_tz_disable(int tz_id);
-int thermal_notify_tz_trip_down(int tz_id, int id);
-int thermal_notify_tz_trip_up(int tz_id, int id);
+int thermal_notify_tz_trip_down(int tz_id, int id, int temp);
+int thermal_notify_tz_trip_up(int tz_id, int id, int temp);
 int thermal_notify_tz_trip_delete(int tz_id, int id);
 int thermal_notify_tz_trip_add(int tz_id, int id, int type,
                               int temp, int hyst);

@@ -49,12 +49,12 @@ static inline int thermal_notify_tz_disable(int tz_id)
        return 0;
 }

-static inline int thermal_notify_tz_trip_down(int tz_id, int id)
+static inline int thermal_notify_tz_trip_down(int tz_id, int id, int temp)
 {
        return 0;
 }

-static inline int thermal_notify_tz_trip_up(int tz_id, int id)
+static inline int thermal_notify_tz_trip_up(int tz_id, int id, int temp)
 {
        return 0;
 }
--

2.25.1

Re: [PATCH RESEND] thermal/drivers/netlink: Add the temperature when crossing a trip point

From: Daniel Lezcano <hidden>
Date: 2021-10-06 12:20:54

On 05/10/2021 17:20, Rafael J. Wysocki wrote:

On Sat, Oct 2, 2021 at 12:33 AM Daniel Lezcano
[off-list ref] wrote:

quoted

The slope of the temperature increase or decrease can be high and when
the temperature crosses the trip point, there could be a significant
difference between the trip temperature and the measured temperatures.

That forces the userspace to read the temperature back right after
receiving a trip violation notification.

In order to be efficient, give the temperature which resulted in the
trip violation.

Signed-off-by: Daniel Lezcano <redacted>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

This looks fine to me too.

quoted

---
 drivers/thermal/thermal_core.c    |  6 ++++--
 drivers/thermal/thermal_netlink.c | 11 ++++++-----
 drivers/thermal/thermal_netlink.h |  8 ++++----
 3 files changed, 14 insertions(+), 11 deletions(-)

diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index 51374f4e1cca..9e243d9f929e 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c

@@ -375,10 +375,12 @@ static void handle_thermal_trip(struct thermal_zone_device *tz, int trip)
        if (tz->last_temperature != THERMAL_TEMP_INVALID) {
                if (tz->last_temperature < trip_temp &&
                    tz->temperature >= trip_temp)
-                       thermal_notify_tz_trip_up(tz->id, trip);
+                       thermal_notify_tz_trip_up(tz->id, trip,
+                                                 tz->temperature);
                if (tz->last_temperature >= trip_temp &&
                    tz->temperature < (trip_temp - hyst))
-                       thermal_notify_tz_trip_down(tz->id, trip);
+                       thermal_notify_tz_trip_down(tz->id, trip,
+                                                   tz->temperature);

While at it, I'm not sure if all of the additional line breaks due to
the line length limit are really necessary.  The code would be easier
to follow without them IMV.

Ok let me write another patch to wrap those into a single function and
reduce the indentation.

quoted

        }

        if (type == THERMAL_TRIP_CRITICAL || type == THERMAL_TRIP_HOT)

diff --git a/drivers/thermal/thermal_netlink.c b/drivers/thermal/thermal_netlink.c
index 1234dbe95895..a16dd4d5d710 100644
--- a/drivers/thermal/thermal_netlink.c
+++ b/drivers/thermal/thermal_netlink.c

@@ -121,7 +121,8 @@ static int thermal_genl_event_tz(struct param *p)
 static int thermal_genl_event_tz_trip_up(struct param *p)
 {
        if (nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_ID, p->tz_id) ||
-           nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_TRIP_ID, p->trip_id))
+           nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_TRIP_ID, p->trip_id) ||
+           nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_TEMP, p->temp))
                return -EMSGSIZE;

        return 0;

@@ -285,16 +286,16 @@ int thermal_notify_tz_disable(int tz_id)
        return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_DISABLE, &p);
 }

-int thermal_notify_tz_trip_down(int tz_id, int trip_id)
+int thermal_notify_tz_trip_down(int tz_id, int trip_id, int temp)
 {
-       struct param p = { .tz_id = tz_id, .trip_id = trip_id };
+       struct param p = { .tz_id = tz_id, .trip_id = trip_id, .temp = temp };

        return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_TRIP_DOWN, &p);
 }

-int thermal_notify_tz_trip_up(int tz_id, int trip_id)
+int thermal_notify_tz_trip_up(int tz_id, int trip_id, int temp)
 {
-       struct param p = { .tz_id = tz_id, .trip_id = trip_id };
+       struct param p = { .tz_id = tz_id, .trip_id = trip_id, .temp = temp };

        return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_TRIP_UP, &p);
 }

diff --git a/drivers/thermal/thermal_netlink.h b/drivers/thermal/thermal_netlink.h
index 828d1dddfa98..e554f76291f4 100644
--- a/drivers/thermal/thermal_netlink.h
+++ b/drivers/thermal/thermal_netlink.h

@@ -11,8 +11,8 @@ int thermal_notify_tz_create(int tz_id, const char *name);
 int thermal_notify_tz_delete(int tz_id);
 int thermal_notify_tz_enable(int tz_id);
 int thermal_notify_tz_disable(int tz_id);
-int thermal_notify_tz_trip_down(int tz_id, int id);
-int thermal_notify_tz_trip_up(int tz_id, int id);
+int thermal_notify_tz_trip_down(int tz_id, int id, int temp);
+int thermal_notify_tz_trip_up(int tz_id, int id, int temp);
 int thermal_notify_tz_trip_delete(int tz_id, int id);
 int thermal_notify_tz_trip_add(int tz_id, int id, int type,
                               int temp, int hyst);

@@ -49,12 +49,12 @@ static inline int thermal_notify_tz_disable(int tz_id)
        return 0;
 }

-static inline int thermal_notify_tz_trip_down(int tz_id, int id)
+static inline int thermal_notify_tz_trip_down(int tz_id, int id, int temp)
 {
        return 0;
 }

-static inline int thermal_notify_tz_trip_up(int tz_id, int id)
+static inline int thermal_notify_tz_trip_up(int tz_id, int id, int temp)
 {
        return 0;
 }
--

2.25.1


-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

`h`	back out one level
`j`	next message in thread
`k`	previous message in thread
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help