RE: ACPI 2.5.70+ problem
From: Grover, Andrew <hidden>
Date: 2003-06-09 20:32:14
I have no idea. Did it work on previous kernels w/ACPI? I see several bugs in bugzilla that might be the same thing...hard to say. Regards -- Andy PS CC-ing acpi-devel
-----Original Message-----
From: Stephen Hemminger [mailto:shemminger-3NddpPZAyC0@public.gmane.org]
Sent: Monday, June 09, 2003 1:12 PM
To: Grover, Andrew
Subject: ACPI 2.5.70+ problem
Trying to run 2.5.70 on one our older VA Linux blade servers.
Is this a known ACPI problem or something new?
Is it the reason the machine doesn't boot?
LILO boot:
Loading linux-2.5......................
Linux version 2.5.70 (shemminger@cl001) (gcc version 3.2
20020903 (Red Hat Linux 8.0 3.2-7)) #2 Mon Jun 9 11:29:16 PDT 2003
Video mode to be used for restore is ffff
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fffb000 (usable)
BIOS-e820: 000000003fffb000 - 000000003ffff000 (ACPI data)
BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
Warning only 896MB will be used.
Use a HIGHMEM enabled kernel.
896MB LOWMEM available.
On node 0 totalpages: 229376
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
ACPI: RSDP (v000 ASUS ) @ 0x000f6250
ACPI: RSDT (v001 ASUS CUR-DLS 12336.12337) @ 0x3fffb000
ACPI: FADT (v001 ASUS CUR-DLS 12336.12337) @ 0x3fffb100
ACPI: BOOT (v001 ASUS CUR-DLS 12336.12337) @ 0x3fffb040
ACPI: MADT (v001 ASUS CUR-DLS 12336.12337) @ 0x3fffb080
ACPI: DSDT (v001 ASUS CUR-DLS 00000.04096) @ 0x00000000
ACPI: BIOS passes blacklist
Building zonelist for node : 0
Kernel command line: auto BOOT_IMAGE=linux-2.5 ro root=306
BOOT_FILE=/boot/vmlinuz-2.5.70 console=ttyS0,38400n8 console=tty1
Initializing CPU#0
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 867.315 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1712.12 BogoMIPS
Memory: 905008k/917504k available (1569k kernel code, 11716k
reserved, 533k data, 292k init, 0k highmem)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
-> /dev
-> /dev/console
-> /root
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU serial number disabled.
CPU: Intel Pentium III (Coppermine) stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v2.0 (20020519)
Initializing RT netlink socket
PCI: PCI BIOS revision 2.10 entry at 0xf0a80, last bus=1
PCI: Using configuration type 1
BIO: pool of 256 setup, 14Kb (56 bytes/bio)
biovec pool[0]: 1 bvecs: 256 entries (12 bytes)
biovec pool[1]: 4 bvecs: 256 entries (48 bytes)
biovec pool[2]: 16 bvecs: 256 entries (192 bytes)
biovec pool[3]: 64 bvecs: 256 entries (768 bytes)
biovec pool[4]: 128 bvecs: 256 entries (1536 bytes)
biovec pool[5]: 256 bvecs: 256 entries (3072 bytes)
ACPI: Subsystem revision 20030522
tbxface-0117 [03] acpi_load_tables : ACPI Tables
successfully acquired
Parsing all Control
Methods:......................................................
..............................................................
....................
Table [DSDT](id F004) - 437 Objects with 41 Devices 136
Methods 13 Regions
ACPI Namespace successfully loaded at root c0364f7c
evxfevnt-0093 [04] acpi_enable : Transition to ACPI
mode successful
evgpeblk-0743 [06] ev_create_gpe_block : GPE 00 to 31
[_GPE] 4 regs at 000000000000EB10 on int 9
evgpeblk-0262 [08] ev_save_method_info : Registered GPE
method _L00 as GPE number 0x00
Completing Region/Field/Buffer/Package
initialization:...............................................
.............
Initialized 13/13 Regions 0/0 Fields 37/37 Buffers 10/10
Packages (445 nodes)
Executing all Device _STA and_INI
methods:..........................................
42 Devices found containing: 42 _STA, 1 _INI methods
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14
15, disabled)
pci_link-0256 [10] acpi_pci_link_get_curr: No IRQ resource found
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14
15, disabled)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14
15, disabled)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14
15, disabled)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14
15, disabled)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14
15, disabled)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14
15, disabled)
ACPI: PCI Interrupt Link [LNKI] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKJ] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKK] (IRQs 3 4 5 6 7 9 10 11 12 14
15, disabled)
ACPI: PCI Interrupt Link [LNKL] (IRQs 3 4 5 6 7 9 10 11 12 14
15, disabled)
ACPI: PCI Interrupt Link [LNKM] (IRQs 3 4 5 6 7 9 10 11 12 14
15, disabled)
ACPI: PCI Interrupt Link [LNKN] (IRQs 3 4 5 6 7 9 10 11 12 14
15, disabled)
ACPI: PCI Interrupt Link [LNKO] (IRQs 3 4 5 6 7 9 10 11 12 14
15, disabled)
ACPI: PCI Interrupt Link [LNKP] (IRQs 3 4 5 6 7 9 10 11 12 14
15, disabled)
ACPI: PCI Interrupt Link [LNKR] (IRQs 3 4 5 *6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKS] (IRQs 3 4 5 6 7 9 10 11 12 14
15, disabled)
ACPI: PCI Interrupt Link [LNKT] (IRQs 3 4 5 *6 7 9 10 11 12 14 15)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Root Bridge [PCI1] (00:00)
Linux Plug and Play Support v0.96 (c) Adam Belay
pty: 256 Unix98 ptys configured
block request queues:
4/128 requests per read queue
4/128 requests per write queue
enter congestion at 15
exit congestion at 17
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
pci_link-0361 [33] acpi_pci_link_set : Attempt to enable
at IRQ 9 resulted in IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 0
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10
pci_link-0361 [37] acpi_pci_link_set : Attempt to enable
at IRQ 9 resulted in IRQ 11
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 0
pci_link-0361 [38] acpi_pci_link_set : Attempt to enable
at IRQ 9 resulted in IRQ 11
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 0
ACPI: PCI Interrupt Link [LNKK] enabled at IRQ 9
pci_link-0361 [40] acpi_pci_link_set : Attempt to enable
at IRQ 5 resulted in IRQ 11
ACPI: PCI Interrupt Link [LNKL] enabled at IRQ 0
ACPI: PCI Interrupt Link [LNKM] enabled at IRQ 5
ACPI: PCI Interrupt Link [LNKN] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKO] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKP] enabled at IRQ 9
ACPI: PCI Interrupt Link [LNKS] enabled at IRQ 5
pci_link-0502 [46] acpi_pci_link_get_irq : Link disabled
pci_irq-0256 [45] acpi_pci_irq_lookup : Invalid IRQ link
routing entry
pci_irq-0295 [45] acpi_pci_irq_derive : Unable to derive
IRQ for device 00:04.0
ACPI: No IRQ known for interrupt pin A of device 00:04.0
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option
'pci=noacpi' or even 'acpi=off'
SBF: Simple Boot Flag extension found and enabled.
SBF: Setting boot flags 0x80
Enabling SEP on CPU 0
udf: registering filesystem
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1)
Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
floppy0: no floppy controllers found
Intel(R) PRO/100 Network Driver - version 2.3.13-k1
Copyright (c) 2003 Intel Corporation
pci_link-0502 [45] acpi_pci_link_get_irq : Link disabled
pci_irq-0256 [44] acpi_pci_irq_lookup : Invalid IRQ link
routing entry
pci_irq-0295 [44] acpi_pci_irq_derive : Unable to derive
IRQ for device 00:04.0
ACPI: No IRQ known for interrupt pin A of device 00:04.0
e100: eth0: Intel(R) PRO/100 Network Connection
Hardware receive checksums enabled
cpu cycle saver enabled
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
SvrWks OSB4: IDE controller at PCI slot 00:0f.1
SvrWks OSB4: chipset revision 0
SvrWks OSB4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:pio
hda: QUANTUM FIREBALLP LM20.5, ATA DISK drive
hdb: QUANTUM FIREBALLP LM20.5, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: CD-540E, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: host protected area => 1
hda: 40132503 sectors (20548 MB) w/1900KiB Cache,
CHS=39813/16/63, (U)DMA
hda: hda1 hda2 hda3 hda4 < hda5 hda6 >
hdb: max request size: 128KiB
hdb: host protected area => 1
hdb: 40132503 sectors (20548 MB) w/1900KiB Cache,
CHS=39813/16/63, (U)DMA
hdb: hdb1 hdb2 hdb3
hdc: ATAPI 40X CD-ROM drive, 128kB Cache, (U)DMA
Uniform CD-ROM driver Revision: 3.12
mice: PS/2 mouse device common for all mice
input: PC Speaker
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
EXT2-fs warning (device hda6): ext2_fill_super: mounting ext3
filesystem as ext2
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 292k freed
Disabling IRQ #9------------------------------------------------------- This SF.net email is sponsored by: Etnus, makers of TotalView, The best thread debugger on the planet. Designed with thread debugging features you've never dreamed of, try TotalView 6 free at www.etnus.com.