RE: 2.4.21-rc1+acpi_24042003: Failure on Compaq 1722EA

It's ok for filing any ACPI issues on bugzilla.kernel.org, including both 2.4 and 2.5.
Thanks,
Luming

-----Original Message-----
From: Dimitris Stasinopoulos [mailto:dimitris@linea.gr]
Sent: 2003年5月13日 18:02
To: Yu, Luming
Subject: Re: [ACPI] 2.4.21-rc1+acpi_24042003: Failure on Compaq 1722EA


Hello, bugzilla.kernel.org is for kernel 2.5.x only, so there's no point 
in doing that since I'm running 2.4.x

Regards,
Dimitris

-- 
Perhaps it IS a good day to die! I say we ship the software!

On Tuesday 13 May 2003 11:25, you wrote:

Would you please file this issue on bugzilla.kernel.org.

Thanks,
Luming

-----Original Message-----
From: Dimitris Stasinopoulos [mailto:dimitris@linea.gr]
Sent: 2003年4月30日 16:03
To: acpi-devel@lists.sourceforge.net
Subject: [ACPI] 2.4.21-rc1+acpi_24042003: Failure on Compaq 1722EA


Hello, I have a Compaq 1722EA, which works with the _stock_ DSDTs quite
well (battery, thermal zone, AC, fan, lid), in conjuction with kernel
2.4.18+acpi04102002. I do however want to upgrade to 2.4.21-rc1, but
patching up with acpi24042003 and trying to boot get nowhere. After
printing these messages:

ACPI: Embedded controler [H8] (gpe 29)
schedule_task(): keventd has not started
schedule_task(): keventd has not started
PCI: probing PCI hardware
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10

it hangs indefinately, without any further messages. The PCI bridge is
an Intel 82801BAM/CAM. So:

1) Any ideas on the problem? All I want is battery stats, the thermal
zone, AC, fan and the lid button. Sleep states do not concern me.
2) Is there any way I can port the 2.4.18+acpi patch code that works
for me to 2.4.21-rc1? Or are there major changes in the rest of the
kernel that effectively prohibit this?  Thanks in advance

Dimitris

'���+
.)��Z+�`����zw
h&��㭴�t��ւ���N��\����u�bq�^v�"�˞���jם����^�׫���z�%�ب��0���z�k�ǥ�{�~���&