Hi, list
I am porting an ethernet driver from 2.6.x to 3.7.1. I found in the new
kernel, the ndo_set_multicast_list method in the net_device_ops had been
removed. What's the story behind? Can I simply ignore this method
defined in an old driver?
Please also help to check the below code, is the list of the operations
defined for my driver enough or not?
const struct net_device_ops ax_netdev_ops = {
.ndo_open = mydriver_open,
.ndo_stop = mydriver_close,
.ndo_start_xmit = mydriver_start_xmit,
.ndo_get_stats = mydriver_get_stats,
/*.ndo_set_multicast_list = mydriver_set_multicast_list,*/
.ndo_set_mac_address = mydriver_set_mac_address,
};
Thanks in advance.
--
woody
I can't go back to yesterday - because I was a different person then.
On Tue, 2012-12-25 at 00:30 +0800, Woody Wu wrote:
Hi, list
I am porting an ethernet driver from 2.6.x to 3.7.1. I found in the new
kernel, the ndo_set_multicast_list method in the net_device_ops had been
removed. What's the story behind? Can I simply ignore this method
defined in an old driver?
Please also help to check the below code, is the list of the operations
defined for my driver enough or not?
const struct net_device_ops ax_netdev_ops = {
.ndo_open = mydriver_open,
.ndo_stop = mydriver_close,
.ndo_start_xmit = mydriver_start_xmit,
.ndo_get_stats = mydriver_get_stats,
/*.ndo_set_multicast_list = mydriver_set_multicast_list,*/
.ndo_set_mac_address = mydriver_set_mac_address,
};
Thanks in advance.
Take a look at :
commit afc4b13df143122f99a0eb10bfefb216c2806de0
Author: Jiri Pirko [off-list ref]
Date: Tue Aug 16 06:29:01 2011 +0000
net: remove use of ndo_set_multicast_list in drivers
replace it by ndo_set_rx_mode
Signed-off-by: Jiri Pirko [off-list ref]
Signed-off-by: David S. Miller [off-list ref]
On Mon, Dec 24, 2012 at 11:16:27AM -0800, Eric Dumazet wrote:
On Tue, 2012-12-25 at 00:30 +0800, Woody Wu wrote:
quoted
Hi, list
I am porting an ethernet driver from 2.6.x to 3.7.1. I found in the new
kernel, the ndo_set_multicast_list method in the net_device_ops had been
removed. What's the story behind? Can I simply ignore this method
defined in an old driver?
Please also help to check the below code, is the list of the operations
defined for my driver enough or not?
const struct net_device_ops ax_netdev_ops = {
.ndo_open = mydriver_open,
.ndo_stop = mydriver_close,
.ndo_start_xmit = mydriver_start_xmit,
.ndo_get_stats = mydriver_get_stats,
/*.ndo_set_multicast_list = mydriver_set_multicast_list,*/
.ndo_set_mac_address = mydriver_set_mac_address,
};
Thanks in advance.
Take a look at :
commit afc4b13df143122f99a0eb10bfefb216c2806de0
Author: Jiri Pirko [off-list ref]
Date: Tue Aug 16 06:29:01 2011 +0000
net: remove use of ndo_set_multicast_list in drivers
replace it by ndo_set_rx_mode
Signed-off-by: Jiri Pirko [off-list ref]
Signed-off-by: David S. Miller [off-list ref]
Thanks for the info!
--
woody
I can't go back to yesterday - because I was a different person then.