[PATCHv9] pathspec: allow querying for attributes
From: Stefan Beller <hidden>
Date: 2016-06-16 02:19:32
Subsystem:
documentation, the rest · Maintainers:
Jonathan Corbet, Linus Torvalds
The pathspec mechanism is extended via the new
":(attr:eol=input)pattern/to/match" syntax to filter paths so that it
requires paths to not just match the given pattern but also have the
specified attrs attached for them to be chosen.
Signed-off-by: Stefan Beller <redacted>
---
Junio, please replace the last patch of sb/pathspec-label with this one.
diff to last round:
# diff --git a/Documentation/glossary-content.txt b/Documentation/glossary-content.txt
# index e06520b..181f52e 100644
# --- a/Documentation/glossary-content.txt
# +++ b/Documentation/glossary-content.txt
# @@ -389,7 +389,7 @@ After `attr:` comes a space separated list of "attribute
# requirements", all of which must be met in order for the
# path to be considered a match; this is in addition to the
# usual non-magic pathspec pattern matching.
# -
# ++
# Each of the attribute requirements for the path takes one of
# these forms:
#
# diff --git a/pathspec.c b/pathspec.c
# index 693a5e7..0a02255 100644
# --- a/pathspec.c
# +++ b/pathspec.c
# @@ -115,19 +115,19 @@ static void parse_pathspec_attr_match(struct pathspec_item *item, const char *va
# const char *attr = si->string;
# struct attr_match *am = &item->attr_match[j];
#
# - attr_len = strcspn(attr, "=");
# switch (*attr) {
# case '!':
# am->match_mode = MATCH_UNSPECIFIED;
# attr++;
# - attr_len--;
# + attr_len = strlen(attr);
# break;
# case '-':
# am->match_mode = MATCH_UNSET;
# attr++;
# - attr_len--;
# + attr_len = strlen(attr);
# break;
# default:
# + attr_len = strcspn(attr, "=");
# if (attr[attr_len] != '=')
# am->match_mode = MATCH_SET;
# else {
# diff --git a/t/t6134-pathspec-with-labels.sh b/t/t6134-pathspec-with-labels.sh
# index 5da1a63..a5c9632 100755
# --- a/t/t6134-pathspec-with-labels.sh
# +++ b/t/t6134-pathspec-with-labels.sh
# @@ -40,8 +40,7 @@ test_expect_success 'setup a tree' '
# '
#
# test_expect_success 'pathspec with no attr' '
# - test_must_fail git ls-files ":(attr:)" 2>actual &&
# - test_i18ngrep fatal actual
# + test_must_fail git ls-files ":(attr:)"
# '
#
# test_expect_success 'pathspec with labels and non existent .gitattributes' '
# @@ -156,8 +155,12 @@ test_expect_success 'check label excluding other labels' '
# '
#
# test_expect_success 'abort on giving invalid label on the command line' '
# - test_must_fail git ls-files . ":(attr:☺)" 2>actual &&
# - test_i18ngrep "fatal" actual
# + test_must_fail git ls-files . ":(attr:☺)"
# +'
# +
# +test_expect_success 'abort on asking for wrong magic' '
# + test_must_fail git ls-files . ":(attr:-label=foo)" &&
# + test_must_fail git ls-files . ":(attr:!label=foo)"
# '
#
# test_done
Documentation/glossary-content.txt | 20 +++++
dir.c | 35 ++++++++
pathspec.c | 101 +++++++++++++++++++++-
pathspec.h | 16 ++++
t/t6134-pathspec-with-labels.sh | 166 +++++++++++++++++++++++++++++++++++++
5 files changed, 334 insertions(+), 4 deletions(-)
create mode 100755 t/t6134-pathspec-with-labels.sh
diff --git a/Documentation/glossary-content.txt b/Documentation/glossary-content.txt
index cafc284..181f52e 100644
--- a/Documentation/glossary-content.txt
+++ b/Documentation/glossary-content.txt@@ -384,6 +384,26 @@ full pathname may have special meaning: + Glob magic is incompatible with literal magic. +attr;; +After `attr:` comes a space separated list of "attribute +requirements", all of which must be met in order for the +path to be considered a match; this is in addition to the +usual non-magic pathspec pattern matching. ++ +Each of the attribute requirements for the path takes one of +these forms: + +- "`ATTR`" requires that the attribute `ATTR` must be set. + +- "`-ATTR`" requires that the attribute `ATTR` must be unset. + +- "`ATTR=VALUE`" requires that the attribute `ATTR` must be + set to the string `VALUE`. + +- "`!ATTR`" requires that the attribute `ATTR` must be + unspecified. ++ + exclude;; After a path matches any non-exclude pathspec, it will be run through all exclude pathspec (magic signature: `!`). If it
diff --git a/dir.c b/dir.c
index 996653b..fc071af 100644
--- a/dir.c
+++ b/dir.c@@ -9,6 +9,7 @@ */ #include "cache.h" #include "dir.h" +#include "attr.h" #include "refs.h" #include "wildmatch.h" #include "pathspec.h"
@@ -215,6 +216,37 @@ int within_depth(const char *name, int namelen, return 1; } +static int match_attrs(const char *name, int namelen, + const struct pathspec_item *item) +{ + int i; + + git_check_attr_counted(name, namelen, item->attr_check); + for (i = 0; i < item->attr_match_nr; i++) { + const char *value; + int matched; + enum attr_match_mode match_mode; + + value = item->attr_check->check[i].value; + match_mode = item->attr_match[i].match_mode; + + if (ATTR_TRUE(value)) + matched = (match_mode == MATCH_SET); + else if (ATTR_FALSE(value)) + matched = (match_mode == MATCH_UNSET); + else if (ATTR_UNSET(value)) + matched = (match_mode == MATCH_UNSPECIFIED); + else + matched = (match_mode == MATCH_VALUE && + !strcmp(item->attr_match[i].value, value)); + + if (!matched) + return 0; + } + + return 1; +} + #define DO_MATCH_EXCLUDE 1 #define DO_MATCH_DIRECTORY 2
@@ -270,6 +302,9 @@ static int match_pathspec_item(const struct pathspec_item *item, int prefix, strncmp(item->match, name - prefix, item->prefix)) return 0; + if (item->attr_match_nr && !match_attrs(name, namelen, item)) + return 0; + /* If the match was just the prefix, we matched */ if (!*match) return MATCHED_RECURSIVELY;
diff --git a/pathspec.c b/pathspec.c
index 4dff252..0a02255 100644
--- a/pathspec.c
+++ b/pathspec.c@@ -1,6 +1,7 @@ #include "cache.h" #include "dir.h" #include "pathspec.h" +#include "attr.h" /* * Finds which of the given pathspecs match items in the index.
@@ -88,12 +89,78 @@ static void prefix_short_magic(struct strbuf *sb, int prefixlen, strbuf_addf(sb, ",prefix:%d)", prefixlen); } +static void parse_pathspec_attr_match(struct pathspec_item *item, const char *value) +{ + struct string_list_item *si; + struct string_list list = STRING_LIST_INIT_DUP; + + + if (!value || !strlen(value)) + die(_("attr spec must not be empty")); + + string_list_split(&list, value, ' ', -1); + string_list_remove_empty_items(&list, 0); + + if (!item->attr_check) + item->attr_check = git_attr_check_alloc(); + else + die(_("Only one 'attr:' specification is allowed.")); + + ALLOC_GROW(item->attr_match, item->attr_match_nr + list.nr, item->attr_match_alloc); + + for_each_string_list_item(si, &list) { + size_t attr_len; + + int j = item->attr_match_nr++; + const char *attr = si->string; + struct attr_match *am = &item->attr_match[j]; + + switch (*attr) { + case '!': + am->match_mode = MATCH_UNSPECIFIED; + attr++; + attr_len = strlen(attr); + break; + case '-': + am->match_mode = MATCH_UNSET; + attr++; + attr_len = strlen(attr); + break; + default: + attr_len = strcspn(attr, "="); + if (attr[attr_len] != '=') + am->match_mode = MATCH_SET; + else { + am->match_mode = MATCH_VALUE; + am->value = xstrdup(&attr[attr_len + 1]); + if (strchr(am->value, '\\')) + die(_("attr spec values must not contain backslashes")); + } + break; + } + + am->attr = git_attr_counted(attr, attr_len); + if (!am->attr) { + struct strbuf sb = STRBUF_INIT; + am->match_mode = INVALID_ATTR; + invalid_attr_name_message(&sb, attr, attr_len); + die(_("invalid attribute in '%s': '%s'"), value, sb.buf); + } + + git_attr_check_append(item->attr_check, am->attr); + } + + string_list_clear(&list, 0); + return; +} + static void eat_long_magic(struct pathspec_item *item, const char *elt, unsigned *magic, int *pathspec_prefix, const char **copyfrom_, const char **long_magic_end) { int i; const char *copyfrom = *copyfrom_; + const char *body; /* longhand */ const char *nextat; for (copyfrom = elt + 2;
@@ -108,15 +175,21 @@ static void eat_long_magic(struct pathspec_item *item, const char *elt, if (!len) continue; - if (starts_with(copyfrom, "prefix:")) { + if (skip_prefix(copyfrom, "prefix:", &body)) { char *endptr; - *pathspec_prefix = strtol(copyfrom + 7, - &endptr, 10); + *pathspec_prefix = strtol(body, &endptr, 10); if (endptr - copyfrom != len) die(_("invalid parameter for pathspec magic 'prefix'")); continue; } + if (skip_prefix(copyfrom, "attr:", &body)) { + char *attr_body = xmemdupz(body, len - strlen("attr:")); + parse_pathspec_attr_match(item, attr_body); + free(attr_body); + continue; + } + for (i = 0; i < ARRAY_SIZE(pathspec_magic); i++) { if (strlen(pathspec_magic[i].name) == len && !strncmp(pathspec_magic[i].name, copyfrom, len)) {
@@ -425,7 +498,10 @@ void parse_pathspec(struct pathspec *pathspec, for (i = 0; i < n; i++) { unsigned short_magic; entry = argv[i]; - + item[i].attr_check = NULL; + item[i].attr_match = NULL; + item[i].attr_match_nr = 0; + item[i].attr_match_alloc = 0; item[i].magic = prefix_pathspec(item + i, &short_magic, argv + i, flags, prefix, prefixlen, entry);
@@ -447,6 +523,13 @@ void parse_pathspec(struct pathspec *pathspec, if (item[i].nowildcard_len < item[i].len) pathspec->has_wildcard = 1; pathspec->magic |= item[i].magic; + + if (item[i].attr_match_nr) { + int j; + for (j = 0; j < item[i].attr_match_nr; j++) + if (item[i].attr_match[j].match_mode == INVALID_ATTR) + die(_("attribute spec in the wrong syntax are prohibited.")); + } } if (nr_exclude == n)
@@ -502,6 +585,16 @@ void copy_pathspec(struct pathspec *dst, const struct pathspec *src) void free_pathspec(struct pathspec *pathspec) { + int i, j; + for (i = 0; i < pathspec->nr; i++) { + if (!pathspec->items[i].attr_match_nr) + continue; + for (j = 0; j < pathspec->items[j].attr_match_nr; j++) + free(pathspec->items[i].attr_match[j].value); + free(pathspec->items[i].attr_match); + git_attr_check_free(pathspec->items[i].attr_check); + } + free(pathspec->items); pathspec->items = NULL; }
diff --git a/pathspec.h b/pathspec.h
index 0c11262..5308137 100644
--- a/pathspec.h
+++ b/pathspec.h@@ -32,6 +32,22 @@ struct pathspec { int len, prefix; int nowildcard_len; int flags; + int attr_match_nr; + int attr_match_alloc; + struct attr_match { + struct git_attr *attr; + char *value; + enum attr_match_mode { + MATCH_SET, + MATCH_UNSET, + MATCH_VALUE, + MATCH_UNSPECIFIED, + MATCH_NOT_UNSPECIFIED, + MATCH_SET_OR_VALUE, + INVALID_ATTR + } match_mode; + } *attr_match; + struct git_attr_check *attr_check; } *items; };
diff --git a/t/t6134-pathspec-with-labels.sh b/t/t6134-pathspec-with-labels.sh
new file mode 100755
index 0000000..a5c9632
--- /dev/null
+++ b/t/t6134-pathspec-with-labels.sh@@ -0,0 +1,166 @@ +#!/bin/sh + +test_description='test labels in pathspecs' +. ./test-lib.sh + +test_expect_success 'setup a tree' ' + cat <<-EOF >expect && + fileA + fileAB + fileAC + fileB + fileBC + fileC + fileNoLabel + fileSetLabel + fileUnsetLabel + fileValue + fileWrongLabel + sub/fileA + sub/fileAB + sub/fileAC + sub/fileB + sub/fileBC + sub/fileC + sub/fileNoLabel + sub/fileSetLabel + sub/fileUnsetLabel + sub/fileValue + sub/fileWrongLabel + EOF + mkdir sub && + while read path + do + : >$path && + git add $path || return 1 + done <expect && + git commit -m "initial commit" && + git ls-files >actual && + test_cmp expect actual +' + +test_expect_success 'pathspec with no attr' ' + test_must_fail git ls-files ":(attr:)" +' + +test_expect_success 'pathspec with labels and non existent .gitattributes' ' + git ls-files ":(attr:label)" >actual && + test_must_be_empty actual +' + +test_expect_success 'setup .gitattributes' ' + cat <<-EOF >.gitattributes && + fileA labelA + fileB labelB + fileC labelC + fileAB labelA labelB + fileAC labelA labelC + fileBC labelB labelC + fileUnsetLabel -label + fileSetLabel label + fileValue label=foo + fileWrongLabel label☺ + EOF + git add .gitattributes && + git commit -m "add attributes" +' + +test_expect_success 'check specific set attr' ' + cat <<-EOF >expect && + fileSetLabel + sub/fileSetLabel + EOF + git ls-files ":(attr:label)" >actual && + test_cmp expect actual +' + +test_expect_success 'check specific unset attr' ' + cat <<-EOF >expect && + fileUnsetLabel + sub/fileUnsetLabel + EOF + git ls-files ":(attr:-label)" >actual && + test_cmp expect actual +' + +test_expect_success 'check specific value attr' ' + cat <<-EOF >expect && + fileValue + sub/fileValue + EOF + git ls-files ":(attr:label=foo)" >actual && + test_cmp expect actual && + git ls-files ":(attr:label=bar)" >actual && + test_must_be_empty actual +' + +test_expect_success 'check unspecified attr' ' + cat <<-EOF >expect && + .gitattributes + fileA + fileAB + fileAC + fileB + fileBC + fileC + fileNoLabel + fileWrongLabel + sub/fileA + sub/fileAB + sub/fileAC + sub/fileB + sub/fileBC + sub/fileC + sub/fileNoLabel + sub/fileWrongLabel + EOF + git ls-files ":(attr:!label)" >actual && + test_cmp expect actual +' + +test_expect_success 'check multiple unspecified attr' ' + cat <<-EOF >expect && + .gitattributes + fileC + fileNoLabel + fileWrongLabel + sub/fileC + sub/fileNoLabel + sub/fileWrongLabel + EOF + git ls-files ":(attr:!labelB !labelA !label)" >actual && + test_cmp expect actual +' + +test_expect_success 'check label with more labels but excluded path' ' + cat <<-EOF >expect && + fileAB + fileB + fileBC + EOF + git ls-files ":(attr:labelB)" ":(exclude)sub/" >actual && + test_cmp expect actual +' + +test_expect_success 'check label excluding other labels' ' + cat <<-EOF >expect && + fileAB + fileB + fileBC + sub/fileAB + sub/fileB + EOF + git ls-files ":(attr:labelB)" ":(exclude,attr:labelC)sub/" >actual && + test_cmp expect actual +' + +test_expect_success 'abort on giving invalid label on the command line' ' + test_must_fail git ls-files . ":(attr:☺)" +' + +test_expect_success 'abort on asking for wrong magic' ' + test_must_fail git ls-files . ":(attr:-label=foo)" && + test_must_fail git ls-files . ":(attr:!label=foo)" +' + +test_done
--
2.8.2.123.gb4ad9b6.dirty