Paul Gortmaker [off-list ref] writes:
quoted
quoted
quoted
This is _NOT_ fine, especially if you suggest "patch" the user may
not have, and more importantly does not have a clue why "git apply"
rejected it ("am" does _not_ use "patch" at all).
I'm not 100% sure I'm following what part here is not OK. If you
can help me understand that, I'll respin the change accordingly.
Do not ever mention "patch -p1". It is not the command that "git
am" uses, and it is not what detected the breakage in the patch.
This may be true, but it _is_ the command that I (and others) have
defaulted to using, if for no other reason than ignorance.
quoted
The command to guide the user to is "git apply".
OK. But I don't see a "--dry-run" equivalent -- and "git apply --check"
just gives me a repeat of the same fail messages that "git am" did.
With "patch -p1 --dry-run" I get information that immediately
lets me see whether the patch is viable or not.
What do you mean by "viable"?
Independent from the answer to that question...
Running "git apply -p1" would by definition give you the same
failure without --dry-run (because you know it already failed), no?
Then you could ask for rejects or attempt to apply with reduced
contexts to "git apply" all without having to say --dry-run, as
unapplicable change will not be applied.
On 12-07-12 04:00 PM, Junio C Hamano wrote:
Paul Gortmaker [off-list ref] writes:
quoted
quoted
quoted
quoted
This is _NOT_ fine, especially if you suggest "patch" the user may
not have, and more importantly does not have a clue why "git apply"
rejected it ("am" does _not_ use "patch" at all).
I'm not 100% sure I'm following what part here is not OK. If you
can help me understand that, I'll respin the change accordingly.
Do not ever mention "patch -p1". It is not the command that "git
am" uses, and it is not what detected the breakage in the patch.
This may be true, but it _is_ the command that I (and others) have
defaulted to using, if for no other reason than ignorance.
quoted
The command to guide the user to is "git apply".
OK. But I don't see a "--dry-run" equivalent -- and "git apply --check"
just gives me a repeat of the same fail messages that "git am" did.
With "patch -p1 --dry-run" I get information that immediately
lets me see whether the patch is viable or not.
What do you mean by "viable"?
Sorry, that description was a bit context free. Two typical cases:
1) applying a series of commits (e.g. preempt RT feature) to a newer
baseline. Some of those commits may have been upstreamed and now
present in mainline. The "git am" failure doesn't really hint that
"already applied" may be the case -- e.g. consider and compare the
output when we extract and then intentionally try to re-apply something
already in tree, created with:
-------------
$git format-patch 50fb31cf~..50fb31cf
0001-tty-hvc_opal-Fix-debug-function-name.patch
-------------
With "git am":
--------------------------
$git am 0001-tty-hvc_opal-Fix-debug-function-name.patch
Applying: tty/hvc_opal: Fix debug function name
error: patch failed: drivers/tty/hvc/hvc_opal.c:401
error: drivers/tty/hvc/hvc_opal.c: patch does not apply
Patch failed at 0001 tty/hvc_opal: Fix debug function name
When you have resolved this problem run "git am --resolved".
If you would prefer to skip this patch, instead run "git am --skip".
To restore the original branch and stop patching run "git am --abort".
---------------------------
...versus
---------------------------
$patch -p1 --dry-run < 0001-tty-hvc_opal-Fix-debug-function-name.patch
patching file drivers/tty/hvc/hvc_opal.c
Reversed (or previously applied) patch detected! Assume -R? [n]
Apply anyway? [n]
Skipping patch.
1 out of 1 hunk ignored -- saving rejects to file drivers/tty/hvc/hvc_opal.c.rej
---------------------------
...versus
---------------------------
$git apply -p1 0001-tty-hvc_opal-Fix-debug-function-name.patch
error: patch failed: drivers/tty/hvc/hvc_opal.c:401
error: drivers/tty/hvc/hvc_opal.c: patch does not apply
---------------------------
Maybe there is an easy way to teach git am/apply to detect "previously
applied" in a way similar to patch? The closest I could come to that
was "git apply --check -R ..." and seeing what it said (or didn't say).
2) In maintaining linux stable releases (esp older ones), the dry-run
output, if say it says something like 23/30 chunks failed, it tells me
that the underlying baseline has probably changed too much for a simple
backport. But if only 1/30 chunks fail or similar, I'll simply proceed
since the backport is viable and likely trivial.
Paul.
--
Independent from the answer to that question...
Running "git apply -p1" would by definition give you the same
failure without --dry-run (because you know it already failed), no?
Then you could ask for rejects or attempt to apply with reduced
contexts to "git apply" all without having to say --dry-run, as
unapplicable change will not be applied.