an error when using 'git send-email'

Hello All,

When I use git 'send-email', I get an error "Command unknown:  'AUTH'
at /usr/bin/git-send-email line 775, <STDIN> line 1".
Is there anyone meet the same error?

-- 
Best Wishes
Yongqiang Yang

On Friday, February 18, 2011 at 12:45 CET,
     Yongqiang Yang [off-list ref] wrote:

When I use git 'send-email', I get an error "Command unknown:  'AUTH'
at /usr/bin/git-send-email line 775, <STDIN> line 1".
Is there anyone meet the same error?

You seem to have configured a username and password for SMTP
authentication, yet the server Git connects to doesn't support
authentication.

Make sure the SMTP server you've configured Git to use
(sendemail.smtpserver configuration variable) is the right one.
If so, clear the smtpemail.smtpuser and smtpemail.smtppass
variables as you obviously can't use them with the server.

For testing purposes there are options to "git send-email" to
override the values set in the configuration files. Those might
be more convenient to use when testing out new configurations.

-- 
Magnus Bäck                      Opinions are my own and do not necessarily
SW Configuration Manager         represent the ones of my employer, etc.
Sony Ericsson

On Mon, Feb 21, 2011 at 12:44 AM, Magnus Bäck
[off-list ref] wrote:

On Friday, February 18, 2011 at 12:45 CET,
    Yongqiang Yang [off-list ref] wrote:

quoted

When I use git 'send-email', I get an error "Command unknown:  'AUTH'
at /usr/bin/git-send-email line 775, <STDIN> line 1".
Is there anyone meet the same error?

You seem to have configured a username and password for SMTP
authentication, yet the server Git connects to doesn't support
authentication.

Make sure the SMTP server you've configured Git to use
(sendemail.smtpserver configuration variable) is the right one.
If so, clear the smtpemail.smtpuser and smtpemail.smtppass
variables as you obviously can't use them with the server.

Contents in my .gitconfig file are as follows.
[sendemail]
    smtpencryption = tls
    smtpserver = smtp.gmail.com
    smtpuser = xxxxxxx
    smtpserverport = 587

When I remove the line smtpuser.  Git said my config file is not correct.

Thank you.

For testing purposes there are options to "git send-email" to
override the values set in the configuration files. Those might
be more convenient to use when testing out new configurations.

--
Magnus Bäck                      Opinions are my own and do not necessarily
SW Configuration Manager         represent the ones of my employer, etc.
Sony Ericsson

-- 
Best Wishes
Yongqiang Yang

On Tuesday, February 22, 2011 at 14:30 CET,
     Yongqiang Yang [off-list ref] wrote:

On Mon, Feb 21, 2011 at 12:44 AM, Magnus Bäck
[off-list ref] wrote:

quoted

You seem to have configured a username and password for SMTP
authentication, yet the server Git connects to doesn't support
authentication.

Make sure the SMTP server you've configured Git to use
(sendemail.smtpserver configuration variable) is the right one.
If so, clear the smtpemail.smtpuser and smtpemail.smtppass
variables as you obviously can't use them with the server.

Contents in my .gitconfig file are as follows.
[sendemail]
    smtpencryption = tls
    smtpserver = smtp.gmail.com
    smtpuser = xxxxxxx
    smtpserverport = 587

When I remove the line smtpuser.  Git said my config file is not
correct.

According to your previous email you're running Git 1.5.6.5. That
version doesn't support STARTTLS in send-email, only SSL wrappermode.
Unless Gmail supports the latter on port 465 (which I seriously doubt)
you must either upgrade Git to 1.6.0 or later or have send-email submit
the messages to another SMTP host that can relay the message directly to
the final destination or is capable of STARTTLS-based SMTP and thus able
to connect to Gmail on your behalf. Your Git is ancient so I strongly
suggest the upgrade approach.

-- 
Magnus Bäck                      Opinions are my own and do not necessarily
SW Configuration Manager         represent the ones of my employer, etc.
Sony Ericsson