[RFC PATCH] {checkout,reset} -p: make patch direction configurable
From: Thomas Rast <hidden>
Date: 2016-06-15 22:47:44
When we implemented the -p mode for checkout, reset and stash, some
discussion revolved around the involved patch direction.
Make this configurable for reset and checkout with the following
choices:
index/HEAD other
forward undo addition undo addition
mixed undo addition apply removal
reverse apply removal apply removal
Where for added lines, 'undo addition' means that you will see a '+'
patch and can reverse-apply it; 'apply removal' means you will see a
'-' patch and can forward-apply it.
The default is 'mixed', to keep the behaviour consistent with that
from before the patch.
Signed-off-by: Thomas Rast <redacted>
---
This patch is much easier to read with --color-words.
ISTR that Peff wanted this, and maybe some others. I'm not too
interested because I'm still convinced 'mixed' is the Right Option,
but it was somewhere deep on my todo stack and maybe you like it ;-)
We could do the same for stash, but I don't really see the use there;
it does not have any of the direction-switching issues because it does
not support a rev argument.
Documentation/config.txt | 12 +++++
git-add--interactive.perl | 100 +++++++++++++++++++++++++++++++-------------
2 files changed, 82 insertions(+), 30 deletions(-)
diff --git a/Documentation/config.txt b/Documentation/config.txt
index cb73d75..f5f9b80 100644
--- a/Documentation/config.txt
+++ b/Documentation/config.txt@@ -1146,6 +1146,18 @@ interactive.singlekey:: linkgit:git-add[1]. Note that this setting is silently ignored if portable keystroke input is not available. +interactive.reset.direction:: +interactive.checkout.direction:: + Direction of diffs used in `git reset -p` and `git checkout + -p`. Must be one of 'forward', 'mixed' (default), or + 'reverse'. ++ +With 'forward', diffs are taken forward and applied in reverse, i.e., +if you added a block of code you see an addition patch and are asked +if you want to remove it. 'reverse' instead shows a removal patch +and asks if you to apply it. 'mixed' is the same as 'forward' when +comparing to HEAD or the index, and 'reverse' otherwise. + log.date:: Set default date-time mode for the log command. Setting log.date value is similar to using 'git-log'\'s --date option. The value is one of the
diff --git a/git-add--interactive.perl b/git-add--interactive.perl
index 8ce1ec9..051e47e 100755
--- a/git-add--interactive.perl
+++ b/git-add--interactive.perl@@ -74,6 +74,25 @@ my $patch_mode; my $patch_mode_revision; +sub get_patch_direction_config { + my ($key, $default, $forward, $reverse) = @_; + my $value = $repo->config($key, $default) || $default; + if ($value =~ /^forward$/i) { + return (0, 0); + } elsif ($value =~ /^mixed$/i) { + return (0, 1); + } elsif ($value =~ /^reverse?/i) { + return (1, 1); + } else { + die "$key must be one of 'forward', 'mixed' or 'reverse'"; + } +} + +my ($reset_reverse_head, $reset_reverse_nothead) + = get_patch_direction_config("interactive.reset.direction", "mixed"); +my ($checkout_reverse_head, $checkout_reverse_nothead) + = get_patch_direction_config("interactive.checkout.direction", "mixed"); + sub apply_patch; sub apply_patch_for_checkout_commit; sub apply_patch_for_stash;
@@ -98,48 +117,69 @@ FILTER => undef, }, 'reset_head' => { - DIFF => 'diff-index -p --cached', - APPLY => sub { apply_patch 'apply -R --cached', @_; }, - APPLY_CHECK => 'apply -R --cached', - VERB => 'Unstage', - TARGET => '', - PARTICIPLE => 'unstaging', + DIFF => 'diff-index -p --cached ' + . ($reset_reverse_head ? '-R' : ''), + APPLY => sub { + apply_patch 'apply --cached ' + . ($reset_reverse_head ? '' : '-R'), @_; + }, + APPLY_CHECK => 'apply --cached ' + . ($reset_reverse_head ? '' : '-R'), + VERB => $reset_reverse_head ? 'Apply' : 'Unstage', + TARGET => $reset_reverse_head ? ' to index' : '', + PARTICIPLE => $reset_reverse_head ? 'applying' : 'unstaging', FILTER => 'index-only', }, 'reset_nothead' => { - DIFF => 'diff-index -R -p --cached', - APPLY => sub { apply_patch 'apply --cached', @_; }, - APPLY_CHECK => 'apply --cached', - VERB => 'Apply', - TARGET => ' to index', - PARTICIPLE => 'applying', + DIFF => 'diff-index -p --cached ' + . ($reset_reverse_nothead ? '-R' : ''), + APPLY => sub { + apply_patch 'apply --cached ' + . ($reset_reverse_nothead ? '' : '-R'), @_; + }, + APPLY_CHECK => 'apply --cached ' + . ($reset_reverse_nothead ? '' : '-R'), + VERB => $reset_reverse_nothead ? 'Apply' : 'Unstage', + TARGET => $reset_reverse_nothead ? ' to index' : '', + PARTICIPLE => $reset_reverse_nothead ? 'applying' : 'unstaging', FILTER => 'index-only', }, 'checkout_index' => { - DIFF => 'diff-files -p', - APPLY => sub { apply_patch 'apply -R', @_; }, - APPLY_CHECK => 'apply -R', - VERB => 'Discard', - TARGET => ' from worktree', - PARTICIPLE => 'discarding', + DIFF => 'diff-files -p ' . ($checkout_reverse_head ? '-R' : ''), + APPLY => sub { + apply_patch 'apply ' + . ($checkout_reverse_head ? '' : '-R'), @_; + }, + APPLY_CHECK => 'apply ' . ($checkout_reverse_head ? '' : '-R'), + VERB => $checkout_reverse_head ? 'Apply' : 'Discard', + TARGET => $checkout_reverse_head ? ' to worktree' : ' from worktree', + PARTICIPLE => $checkout_reverse_head ? 'applying' : 'discarding', FILTER => 'file-only', }, 'checkout_head' => { - DIFF => 'diff-index -p', - APPLY => sub { apply_patch_for_checkout_commit '-R', @_ }, - APPLY_CHECK => 'apply -R', - VERB => 'Discard', - TARGET => ' from index and worktree', - PARTICIPLE => 'discarding', + DIFF => 'diff-index -p ' . ($checkout_reverse_head ? '-R' : ''), + APPLY => sub { + apply_patch_for_checkout_commit + $checkout_reverse_head ? '' : '-R', @_; + }, + APPLY_CHECK => 'apply ' . ($checkout_reverse_head ? '' : '-R'), + VERB => $checkout_reverse_head ? 'Apply' : 'Discard', + TARGET => ($checkout_reverse_head ? ' to index and worktree' + : ' from index and worktree'), + PARTICIPLE => $checkout_reverse_head ? 'applying' : 'discarding', FILTER => undef, }, 'checkout_nothead' => { - DIFF => 'diff-index -R -p', - APPLY => sub { apply_patch_for_checkout_commit '', @_ }, - APPLY_CHECK => 'apply', - VERB => 'Apply', - TARGET => ' to index and worktree', - PARTICIPLE => 'applying', + DIFF => 'diff-index -p ' . ($checkout_reverse_nothead ? '-R' : ''), + APPLY => sub { + apply_patch_for_checkout_commit + $checkout_reverse_nothead ? '' : '-R', @_; + }, + APPLY_CHECK => 'apply ' . ($checkout_reverse_nothead ? '' : '-R'), + VERB => $checkout_reverse_nothead ? 'Apply' : 'Discard', + TARGET => ($checkout_reverse_nothead ? ' to index and worktree' + : ' from index and worktree'), + PARTICIPLE => $checkout_reverse_nothead ? 'applying' : 'discarding', FILTER => undef, }, );
--
1.6.5.3.439.g7a64a6.dirty