On Wed, Aug 05, 2020 at 12:16:15PM +0200, Oleksij Rempel wrote:

changes v2:
- add power init support for KvG boards
- spell fixes
- do not print error on probe exit
- add of_console_get_by_alias() helper
- free requested gpio array
- exit fec init only in case of PROBE_DEFERED

This patch series is a preparation and actual Protonic board code.
Following changes was made in the main code:
- register DT root node as device to make it possible to loade board
  code as usual driver
- provide helpers to read ethernet mac from nvmem cell register in a
  devicetree.
- provide barebox-serial driver which should be a nvmem cell consumer
  and
  serial-number DT property provider.
- provide gpio helper to read gpio based board revision.

Oleksij Rempel (13):
  ARM: dts: imx6q-prti6q: fix PHY register
  ARM: dts: imx6: vicut1: fix network support
  of: base: register DT root as device
  ARM: embest-riotboard: port board file to the driver model
  net: port nvmem_get_mac_address() from linux kernel
  of: of_net: sync of_get_mac_address() with latest kernel version
  net: fec_imx: use of_get_mac_address() to get mac address out of DT
  of: of_device_get_match_compatible() helper
  gpiolib: add gpio_array_to_id helper to get ID out of GPIO array
  common: console_common: add of_console_get_by_alias() helper
  ARM: protonic-imx6: port Protonic specific board code
  of: add barebox-serial driver
  ARM: dts: imx6q-prti6q: add barebox,serial-number node

Applied 1-4 for now.

Sascha


-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox